Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® Advanced N3WG6 LS BK - PA9T-GF30 - BASF

Check here, which other Ultramid A datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 材料特有の特性 - Processing Recommendation Injection Molding - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

Partially aromatic, glassfiber reinforced polyphthalamide for injection molding with strong mechanical properties especially at elevated temperatures, good long-term thermal stability and outstanding chemical resistance for highly stressed parts. The product can be characterized as compound with high toughness, stiffness, extremely low water absorption and outstanding dimensional stability. It features high flowability and allows filling of complex parts with thin wall thickness. The product is easily processable with excellent melt stability.

Markets & applications
Automotive: Fuel system, cooling system, powertrain, Auto E&E, sensors, fuel cell
E&E: Connectors

Processing/Physical Characteristics	乾燥/調湿	単位	テスト基準
ISO データ
成形収縮率, 平行	0.5 / *	%	ISO 294-4, 2577
成形収縮率, 直角	1.0 / *	%	ISO 294-4, 2577

機械的特性	乾燥/調湿	単位	テスト基準
ISO データ
引張弾性率	10000 / 10000	MPa	ISO 527
破壊応力	190 / 175	MPa	ISO 527
破壊ひずみ	2.4 / 2.2	%	ISO 527
シャルピー衝撃強さ, +23°C	60 / 50	kJ/m²	ISO 179/1eU
シャルピー衝撃強さ, -30°C	60 / 50	kJ/m²	ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C	8 / 7	kJ/m²	ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C	8 / 7	kJ/m²	ISO 179/1eA

熱的特性	乾燥/調湿	単位	テスト基準
ISO データ
溶融温度, 10°C/min	300 / *	°C	ISO 11357-1/-3
ガラス転移点, 10°C/min	120 / *	°C	ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa	270 / *	°C	ISO 75-1/-2
ビカット軟化温度, B	280 / *	°C	ISO 306
厚さhでの燃焼性	HB / *	class	IEC 60695-11-10
試験片の厚さ	0.8 / *	mm	-

電気的特性.	乾燥/調湿	単位	テスト基準
ISO データ
比誘電率, 1MHz	4 / 3.6	-	IEC 62631-2-1
誘電正接, 1MHz	105 / 205	E-4	IEC 62631-2-1
表面抵抗率	* / >1E15	Ohm	IEC 62631-3-2
耐トラッキング性	- / 600	-	IEC 60112

その他の特性.	乾燥/調湿	単位	テスト基準
吸水率	2 / *	%	Sim. to ISO 62
吸湿率	0.9 / *	%	Sim. to ISO 62
密度	1370 / -	kg/m³	ISO 1183

材料特有の特性	乾燥/調湿	単位	テスト基準
ISO データ
粘度数	100 / *	cm³/g	ISO 307, 1157, 1628

Processing Recommendation Injection Molding	値	単位	テスト基準
Pre-drying - Temperature	120	°C	-
Pre-drying - Time	8	h	-
Processing humidity	≤0.05	%	-
樹脂温度	320 - 340	°C	-
金型温度	100 - 160	°C	-

機能

特殊な特性

成形加工法.

射出成形.

納入形状.

ペレット., 黒

特殊な特性.

熱安定化.

な特性

Melt Strength, Thermal Stability

耐薬品性

General Chemical Resistance

領域別の利用可能性

北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ

その他の情報

村遜速揃

PREPROCESSING
Pre/Post-processing, max. allowed water content: .05 %
Pre/Post-processing, Pre-drying, Temperature: 120 °C
Pre/Post-processing, Pre-drying, Time: 8 h

PROCESSING
injection molding, Melt temperature, range: 320 - 340 °C
injection molding, Melt temperature, recommended: 330 °C
injection molding, Mold temperature, range: 125 - 170 °C
injection molding, Mold temperature, recommended: 140 °C
injection molding, Dwell time, thermoplastics: 5 min

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.