Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultrasint™ TPU01 - TPU - BASF

Material Data Center offers the following functions for Ultrasint™ TPU01:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultrasint datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - 熱的特性 - その他の特性. - 3D Data
Any use of this information falls under the rules of our disclaimer.
機械的特性値単位テスト基準
ISO データ
ショア硬さA 89 - ISO 7619-1
熱的特性値単位テスト基準
ISO データ
溶融温度, 10ﾟC/min 135 °C ISO 11357-1/-3
ガラス転移点, 10ﾟC/min -48 °C ISO 11357-1/-2
1.5mm厚さでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 1.6 mm -
その他の特性.値単位テスト基準
密度. 1100 kg/m³ ISO 1183
Bulk density 500 kg/m³ -
3D Data値単位テスト基準
Other Standards[S]
引張弾性率, flat 85 MPa ISO 527
引張弾性率, upright 85 MPa ISO 527
引張強度, flat 9 MPa ISO 527
引張強度, upright 7 MPa ISO 527
破壊ひずみ, flat 280 % ISO 527
破壊ひずみ, upright 150 % ISO 527
曲げ弾性率, flat 75 MPa ISO 178
曲げ弾性率, upright 75 MPa ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C, flat 0 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, +23°C, upright 0 kJ/m² ISO 179/1eA
ビカット軟化温度, A, flat 97 °C ISO 306
ビカット軟化温度, A, upright 98 °C ISO 306
S: These properties are reported by the producer according standards that are different to our defaults.
特殊な特性
成形加工法.
Additive Manufacturing, Laser Sintering
納入形状.
パウダー., 白
特殊な特性.
紫外線安定化.
耐薬品性
Hydrolytically Stable
アプリケーション
スポーツ用品
領域別の利用可能性
北アメリカ., ヨーロッパ., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.