Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultrason® E 2020 P - PESU - BASF

Material Data Center offers the following functions for Ultrason® E 2020 P:
unit conversion, PDF datasheet print, comparison with other plastics, application examples, CAE Interfaces

Check here, which other Ultrason E datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Polyethersulfone flakes, e.g. for membrane applications, coatings and membranes. The product is soluable in N-Methylpyrrolidone (NMP) and N,N- Dimethylacetamide. The product is not developed for injection moulding.
Abbreviated designation according to ISO 1043-1: PESU
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 - / 2650 MPa ISO 527
降伏応力 - / 85 MPa ISO 527
降伏ひずみ - / 6.9 % ISO 527
シャルピー衝撃強さ, +23°C - / N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C - / 6.5 kJ/m² ISO 179/1eA
ASTM数据
曲げ弾性率 2599 / - MPa ASTM D 790
熱的特性乾燥/調湿単位テスト基準
ISO データ
ガラス転移点, 10°C/min 225 / * °C ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa 205 / * °C ISO 75-1/-2
その他の特性.乾燥/調湿単位テスト基準
吸湿率 1 / * % Sim. to ISO 62
密度 1370 kg/m³ ASTM D 792
材料特有の特性乾燥/調湿単位テスト基準
ISO データ
粘度数 56 / * cm³/g ISO 307, 1157, 1628
特殊な特性
成形加工法.
コーティング.
納入形状.
パウダー., ナチュラルカラー
領域別の利用可能性
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.