Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of UNIVAL™ DMDH-6400 NT 7 - (PE-HD) - The Dow Chemical Company

Material Data Center offers the following functions for UNIVAL™ DMDH-6400 NT 7:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Unival datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 0.8 g/10min ASTM D 1238
温度 190 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ASTM数据
降伏応力 31.7 MPa ASTM D 638
破壊応力 24.1 MPa ASTM D 638
降伏点伸び 7 % ASTM D 638
破断伸び 1000 % ASTM D 638
ショア硬さD 66 - ASTM D 2240
熱的特性値単位テスト基準
ASTM数据
DTUL @ 66 psi 76 °C ASTM D 648
ビカット軟化温度 131 °C ASTM D 1525
Other Standards[S]
溶融温度 133 °C Dow Method
S: These properties are reported by the producer according standards that are different to our defaults.
その他の特性.値単位テスト基準
密度 961 kg/m³ ASTM D 792
特殊な特性
成形加工法.
ブロー成形.
納入形状.
ペレット., 白
特殊な特性.
高耐衝撃及び耐衝撃改良.
な特性
Low Odor
Certifications
Food contact, Food approval 10/2011, Food approval FDA 21 CFR, Drug Master File
アプリケーション
パッケージング
領域別の利用可能性
北アメリカ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.