Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of UROCHEM -171 Grade - Urea-L - Chemiplastica

Material Data Center offers the following functions for UROCHEM -171 Grade:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Urochem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
成形収縮率, 平行 0.8 % ISO 294-4, 2577
機械的特性値単位テスト基準
ISO データ
引張強度 45 MPa ISO 527
シャルピー衝撃強さ, +23°C 5 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 1.1 kJ/m² ISO 179/1eA
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 8.00 MPa 90 °C ISO 75-1/-2
厚さhでの燃焼性 V-0 class IEC 60695-11-10
ASTM数据
酸素指数 30 % ASTM D 2863
電気的特性.値単位テスト基準
ISO データ
体積抵抗率 1E9 Ohm*m IEC 62631-3-1
表面抵抗率 1E10 Ohm IEC 62631-3-2
耐トラッキング性 600 - IEC 60112
その他の特性.値単位テスト基準
密度. 1500 kg/m³ ISO 1183
特殊な特性
成形加工法.
Compression Molding
納入形状.
顆粒.
添加剤.
滑剤.
特殊な特性.
難燃., 紫外線安定化.
な特性
Low Odor, Scratch Resistant
耐薬品性
General Chemical Resistance, Oil Resistance
Certifications
Contains renewable resources
アプリケーション
電気電子
領域別の利用可能性
北アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.