Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Utec® 5541 - (PE-UHMW) - Braskem

Material Data Center offers the following functions for Utec® 5541:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Utec datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
溶融時の熱伝導率 0.4 W/(m K) -
機械的特性値単位テスト基準
ISO データ
降伏応力 17 MPa ISO 527
破壊応力 30 MPa ISO 527
破壊ひずみ 350 % ISO 527
シャルピー衝撃強さ, +23°C 90 kJ/m² ISO 179/1eU
ショア硬さD 64 - ISO 7619-1
ASTM数据
降伏応力 17 MPa ASTM D 638
破壊応力 30 MPa ASTM D 638
破断伸び 300 % ASTM D 638
ショア硬さD 64 - ASTM D 2240
ノッチ付きIzod衝撃強さ, 1/8 in N J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
ビカット軟化温度, A 128 °C ISO 306
ASTM数据
線膨張係数, 平行 150 E-6/K ASTM D 696
DTUL @ 66 psi 79 °C ASTM D 648
DTUL @ 264 psi 48 °C ASTM D 648
溶融温度 133 °C ASTM D 3418
ビカット軟化温度 128 °C ASTM D 1525
熱伝導率, ソリッド 0.0577 W/(m K) ASTM C 177
電気的特性.値単位テスト基準
ASTM数据
耐電圧, 短い時間 90 kV/mm ASTM D 149
表面抵抗率 1E12 Ohm ASTM D 257
体積抵抗率 1E14 Ohm*cm ASTM D 257
その他の特性.値単位テスト基準
吸水率, 24hr 0.01 % ASTM D 570
密度 925 kg/m³ ASTM D 792
Intrinsic Viscosity 24 dl/g -
Bulk Density 450 kg/m³ -
特殊な特性
成形加工法.
その他の押出成形., Compression Molding
特殊な特性.
高耐衝撃及び耐衝撃改良.
な特性
Tribologic Grade
領域別の利用可能性
北アメリカ., ヨーロッパ., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.