Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vampson L 6031 - PPS-(GF+MX)60 - VAMP TECH SPA

Material Data Center offers the following functions for Vampson L 6031:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Vampson datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ASTM数据
成形収縮率., 平行 0.005 mm/mm ASTM D 955
成形収縮率, 直角 0.006 mm/mm ASTM D 955
機械的特性値単位テスト基準
ISO データ
アイゾット衝撃試験, +23°C 10 kJ/m² ISO 180/1U
ノッチ付きIzod衝撃強さ, +23°C 2.5 kJ/m² ISO 180/1A
ASTM数据
曲げ弾性率 16000 MPa ASTM D 790
曲げ強さ 100 MPa ASTM D 790
熱的特性値単位テスト基準
ISO データ
1.5mm厚さでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 1.6 mm -
厚さhでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 3.2 mm -
ASTM数据
DTUL @ 264 psi 250 °C ASTM D 648
ビカット軟化温度 250 °C ASTM D 1525
電気的特性.値単位テスト基準
ISO データ
耐トラッキング性 175 - IEC 60112
その他の特性.値単位テスト基準
密度 1900 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 130 °C -
Pre-drying - Time 3 h -
樹脂温度 310 °C -
金型温度 140 °C -
特殊な特性
成形加工法.
射出成形.
特殊な特性.
難燃., Halogen-free, Phosphorus-free, 熱安定化.
耐薬品性
General Chemical Resistance
Certifications
RoHS
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.