Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® L-GF30 BK E70285 - PA12-GF30 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® L-GF30 BK E70285:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Glass-fiber reinforced, laser-weldable polyamide 12

VESTAMID®  L-GF30 BK E70285 is a glass fiber reinforced, heat-stabilized PA 12 compound with good IR laser transparency for injection molding. The material contains about 30% glass fibers, an ageing protective agent and processing aid for a fast and even form filling.

 

VESTAMID®  L-GF30 BK E70285 is laser-weldable by a diode-pumped or solid-state laser in the range of λ = 808–1064 nm. Using glass fiber reinforcement the strength and the heat deflection temperature are significantly increased.
 

Further advantages of VESTAMID® L-GF30 BK E70285 are the characteristic properties of polyamide 12 as low water absorption, good dimensional stability and almost the same properties at changing ambient humidity.

 

VESTAMID® L-GF30 BK E70285 is supplied as cylindrical pellets ready for processing in moisture-proof bags.

Pigmentation may affect values.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”. 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.VESTAMID.COM

Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
メルトボリュームレイト, MVR 11 / * cm³/10min ISO 1133
温度 250 / * °C -
荷重 5 / * kg -
成形収縮率, 平行 0.3 / * % ISO 294-4, 2577
成形収縮率, 直角 0.9 / * % ISO 294-4, 2577
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 6800 / - MPa ISO 527
降伏応力 122 / - MPa ISO 527
降伏ひずみ 5 / - % ISO 527
破壊呼びひずみ 6 / - % ISO 527
シャルピー衝撃強さ, +23°C 85 / - kJ/m² ISO 179/1eU
Type of failure C / - - -
シャルピー衝撃強さ, -30°C 100 / - kJ/m² ISO 179/1eU
Type of failure C / - - -
ノッチ付きシャルピー衝撃強さ, +23°C 23 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
ノッチ付きシャルピー衝撃強さ, -30°C 21 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10°C/min 178 / * °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 165 / * °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 175 / * °C ISO 75-1/-2
ビカット軟化温度, B 175 / * °C ISO 306
電気的特性.乾燥/調湿単位テスト基準
ISO データ
比誘電率, 100Hz 4 / - - IEC 62631-2-1
比誘電率, 1MHz 3.2 / - - IEC 62631-2-1
誘電正接, 1MHz 290 / - E-4 IEC 62631-2-1
体積抵抗率 7.2E12 / - Ohm*m IEC 62631-3-1
耐電圧 48 / - kV/mm IEC 60243-1
その他の特性.乾燥/調湿単位テスト基準
吸水率 1.1 / * % Sim. to ISO 62
吸湿率 0.6 / * % Sim. to ISO 62
密度 1240 / - kg/m³ ISO 1183
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット., 黒
特殊な特性.
熱安定化.
な特性
Laser Weldable, Weldable
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.