Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® Care ME40 - TPA - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® Care ME40:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Polyamide 12 elastomer molding compounds

VESTAMID® Care ME40 is free of plasticizers and heat and light stabilized. VESTAMID® Care ME40 is resistant to body fluids and toxicologically safe.

VESTAMID® Care ME grades are flexible polyether block amides (PEBA) resins.

The advantages at a glance
- High flexibility & elasticity
- High impact resistance
- Excellent dimensional stability
- High chemical resistance
- Easy processability & colorability

- Plasticizer-free

- Gamma and EtO sterilization resistant

- Tough and resilient

- Low density


Biocompatibility of VESTAMID® Care ME
VESTAMID® Care ME grades were tested on biocompatibility for applications within the body of up to 30 days contact time and comply with USP <88> class VI and ISO 10993 standards.

Biocompatibility tests for VESTAMID® Care:
Standard Description
ASTM F756-08 Hemocompatibility
ISO 10993-5 Cytotoxicity
ISO 10993-10 Sensitization: Maximization test according to Magnusson and Kligman
ISO 10993-10 Irritation: Intracutaneous Reactivity
ISO 10993-11 Acute Systemic Toxicity
USP Class VI Acute Systemic Toxicity Intracutaneous Reactivity Muscle Implantation
Processing of VESTAMID® Care
For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”. 



FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.EVONIK.COM/MEDICAL-TECHNOLOGY


 

Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
メルトボリュームレイト, MVR 38 / * cm³/10min ISO 1133
温度 240 / * °C -
荷重 2.16 / * kg -
成形収縮率, 平行 0.5 / * % ISO 294-4, 2577
成形収縮率, 直角 1.1 / * % ISO 294-4, 2577
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 86 / - MPa ISO 527
引張クリープ弾性率, 1000h * / 60 MPa ISO 899-1
シャルピー衝撃強さ, +23°C N / - kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C N / - kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C N / - kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C N / - kJ/m² ISO 179/1eA
ショア硬さD 40 / * - ISO 7619-1
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10°C/min 151 / * °C ISO 11357-1/-3
ガラス転移点, 10°C/min -60 / * °C ISO 11357-1/-2
荷重たわみ温度, 0.45 MPa 55 / * °C ISO 75-1/-2
ビカット軟化温度, B 60 / * °C ISO 306
線膨張係数, 平行 220 / * E-6/K ISO 11359-1/-2
1.5mm厚さでの燃焼性 HB / * class IEC 60695-11-10
試験片の厚さ 1.6 / * mm -
その他の特性.乾燥/調湿単位テスト基準
吸水率 1 / * % Sim. to ISO 62
密度 1010 / - kg/m³ ISO 1183
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット.
特殊な特性.
高耐衝撃及び耐衝撃改良., 光安定化., 紫外線安定化., 熱安定化., 滅菌可能, エチレンオキシド滅菌(EtO), Gamma irradiation sterilization
耐薬品性
General Chemical Resistance
Certifications
Medical Grade, Biocompatibility ISO 10993, US Pharmacopeia Class VI Approved
アプリケーション
医療の
領域別の利用可能性
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.