Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTODUR® X9400 - PBT-GF10 - Evonik Operations GmbH

Check here, which other Vestodur datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性.

Any use of this information falls under the rules of our disclaimer.

商品の説明文

Glass fiber-reinforced, modified polybutylene terephthalate compound with decreased shrinkage

VESTODUR® X9400 NC is a 10% glass fiber-reinforced, polymer-modified polybutylene terephthalate compound. Moldings of this compound show decreased shrinkage.

 

The compound is suitable for parts that are subjected to high mechanical or thermal loads. Compared with commonly used glass fiber-reinforced PBT compounds with similar stiffness parts of VESTODUR® X9400 have in particular a high surface quality.

 

VESTODUR® X9400 is supplied as cylindrical pellets in polyethylene packaging. 

For information, please follow the general recommendations in our flyer "VESTODUR® Polybutylene terephthalate - Compounds".

 

Pigmentation may affect values.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at tempIeratures not exceeding 30°C.
 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM 
OR VISIT OUR PRODUCT AT  WWW.VESTODUR.COM

Processing/Physical Characteristics	値	単位	テスト基準
ISO データ
成形収縮率, 平行	0.3	%	ISO 294-4, 2577
成形収縮率, 直角	0.4	%	ISO 294-4, 2577

機械的特性	値	単位	テスト基準
ISO データ
引張弾性率	4500	MPa	ISO 527
降伏応力	103	MPa	ISO 527
降伏ひずみ	4	%	ISO 527
破壊呼びひずみ	4	%	ISO 527
シャルピー衝撃強さ, +23°C	50	kJ/m²	ISO 179/1eU
Type of failure	C	-	-
シャルピー衝撃強さ, -30°C	45	kJ/m²	ISO 179/1eU
Type of failure	C	-	-
ノッチ付きシャルピー衝撃強さ, +23°C	5	kJ/m²	ISO 179/1eA
Type of failure	C	-	-
ノッチ付きシャルピー衝撃強さ, -30°C	5	kJ/m²	ISO 179/1eA
Type of failure	C	-	-

熱的特性	値	単位	テスト基準
ISO データ
溶融温度, 10°C/min	218	°C	ISO 11357-1/-3
ガラス転移点, 10°C/min	66	°C	ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa	110	°C	ISO 75-1/-2
荷重たわみ温度, 0.45 MPa	200	°C	ISO 75-1/-2
ビカット軟化温度, B	179	°C	ISO 306
線膨張係数, 平行	30	E-6/K	ISO 11359-1/-2
線膨張係数, 直角	40	E-6/K	ISO 11359-1/-2
1.5mm厚さでの燃焼性	HB	class	IEC 60695-11-10
試験片の厚さ	1.6	mm	-

その他の特性.	値	単位	テスト基準
密度	1350	kg/m³	ISO 1183

特殊な特性

成形加工法.

射出成形.

納入形状.

ペレット., ナチュラルカラー

特殊な特性.

熱安定化.

領域別の利用可能性

北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ

耐薬品性

酸
	5wt％酢酸 (23ﾟC)
	10wt％クエン酸 (23ﾟC)
	36wt％塩酸 (23ﾟC)
	40wt％硝酸 (23ﾟC)
	38wt％硫酸 (23ﾟC)
	5wt％硫酸 (23ﾟC)
塩基
	10wt％水酸化アンモニウム (23ﾟC)
アルコール
	イソプロピルアルコール23℃ (23ﾟC)
	メタノール　23℃ (23ﾟC)
	エタノール　23℃ (23ﾟC)
炭化水素
	イソオクタン (23ﾟC)
ケトン系溶剤
	アセトン (23ﾟC)
エーテル溶剤
	ジエチルエーテル (23ﾟC)
鉱油
	SAE 10W40 マルチグレードモーターオイル (23ﾟC)
	絶縁油 (23ﾟC)
標準燃料
	標準燃料（ISO 1817液C)アルコールなし (23ﾟC)
	ディーゼル燃料（ISO 1817液F) (23ﾟC)
	ディーゼル燃料（ISO 1817液F) (90ﾟC)
食塩水
	10wt％塩化ナトリウム (23ﾟC)
	10wt％次亜塩素酸ナトリウム (23ﾟC)
	20wt％炭酸ナトリウム (23ﾟC)
その他
	エチルアセテート (23ﾟC)
	過酸化水素 (23ﾟC)
	水 (23ﾟC)

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.