Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VICTREX® HT™ 22CA30 - PEK-CF30 - Victrex plc

Material Data Center offers the following functions for VICTREX® HT™ 22CA30:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Victrex HT datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
成形収縮率, 平行 0.1 % ISO 294-4, 2577
成形収縮率, 直角 0.7 % ISO 294-4, 2577
溶融時の熱伝導率 0.95 W/(m K) -
機械的特性値単位テスト基準
ISO データ
引張弾性率 28000 MPa ISO 527
破壊応力 275 MPa ISO 527
破壊ひずみ 1.7 % ISO 527
曲げ弾性率, 23°C 23500 MPa ISO 178
曲げ強さ 400 MPa ISO 178
シャルピー衝撃強さ, +23°C 45 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 6.5 kJ/m² ISO 179/1eA
アイゾット衝撃試験, +23°C 50 kJ/m² ISO 180/1U
ノッチ付きIzod衝撃強さ, +23°C 9 kJ/m² ISO 180/1A
ショア硬さD 88 - ISO 7619-1
熱的特性値単位テスト基準
ISO データ
溶融温度, 10ﾟC/min 373 °C ISO 11357-1/-3
ガラス転移点, 10ﾟC/min 152 °C ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa 368 °C ISO 75-1/-2
線膨張係数, 平行 5 E-6/K ISO 11359-1/-2
グローワイヤ燃焼性指数 (GWFI) 960 °C IEC 60695-2-12
GWFI - 試験片の厚さ 2 mm -
その他の特性.値単位テスト基準
吸水率. 0.5 % Sim. to ISO 62
密度. 1410 kg/m³ ISO 1183
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 120 - 150 °C -
Pre-drying - Time 3 - 5 h -
Processing humidity ≤0.02 % -
金型温度 190 - 215 °C -
Feed temperature ≤100 °C -
Zone 1 380 °C -
Zone 2 390 °C -
Zone 3 395 °C -
Zone 4 400 °C -
Nozzle temperature 405 °C -
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット., 黒
な特性
Tribologic Grade
耐薬品性
General Chemical Resistance
Certifications
Food contact, Food approval 93/10/EC
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.