Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Visico™ LE4423/LE4460/LE4437 - PE - Borealis A/S

Material Data Center offers the following functions for Visico™ LE4423/LE4460/LE4437:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Visico datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 電気的特性. - その他の特性. - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 0.9 g/10min ASTM D 1238
温度 190 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ASTM数据
引張強度 16.5 MPa ASTM D 412
破断伸び 300 % ASTM D 412
電気的特性.値単位テスト基準
ASTM数据
耐電圧, 短い時間 22 kV/mm ASTM D 149
誘電正接, 60 Hz 0.0005 - ASTM D 150
比誘電率, 60 Hz 2.5 - ASTM D 150
その他の特性.値単位テスト基準
密度 923 kg/m³ ASTM D 792
Processing Recommendation Extrusion値単位テスト基準
Zone 1 146 °C -
Zone 2 155 °C -
Zone 3 163 °C -
Zone 4 177 °C -
Nozzle temperature 177 °C -
特殊な特性
成形加工法.
Wire/Cable Extrusion, その他の押出成形.
納入形状.
ナチュラルカラー
添加剤.
金属不活性剤.
特殊な特性.
難燃., 紫外線安定化.
な特性
Crosslinkable, Thermal Stability
耐薬品性
Oxidation Resistance
アプリケーション
電気電子
領域別の利用可能性
北アメリカ., ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.