Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vistamaxx™ 3588FL - TPO - ExxonMobil Chemical

Material Data Center offers the following functions for Vistamaxx™ 3588FL:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Vistamaxx datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
Other Standards[S]
メルトフローレイト, MFI 8 g/10min ExxonMobil Method
温度 230 °C -
荷重 2.16 kg -
S: These properties are reported by the producer according standards that are different to our defaults.
機械的特性値単位テスト基準
Other Standards[S]
降伏応力 16.5 MPa ExxonMobil Method
破壊応力 26.2 MPa ExxonMobil Method
降伏点伸び 20 % ExxonMobil Method
破断伸び 637 % ExxonMobil Method
伸び率100％弾性率 11 MPa ExxonMobil Method
伸び率300％弾性率 3.91 MPa ExxonMobil Method
ショア硬さD 50 - ExxonMobil Method
引裂強さ 127 kN/m ExxonMobil Method
S: These properties are reported by the producer according standards that are different to our defaults.
熱的特性値単位テスト基準
Other Standards[S]
ビカット軟化温度 103 °C ExxonMobil Method
S: These properties are reported by the producer according standards that are different to our defaults.
その他の特性.値単位テスト基準
Other Standards[S]
密度 889 kg/m³ ExxonMobil Method
S: These properties are reported by the producer according standards that are different to our defaults.
特殊な特性
成形加工法.
フィルム押出成形.
納入形状.
ペレット.
Certifications
RoHS
アプリケーション
パッケージング
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.