Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vitane LFC 9350 - TPU - geba Kunststoffcompounds GmbH

Material Data Center offers the following functions for Vitane LFC 9350:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Vitane datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - 電気的特性. - その他の特性. - 試験片の成形条件. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
機械的特性値単位テスト基準
ISO データ
引張強度 15.5 MPa ISO 37
破壊ひずみ 130 % ISO 37
ショア硬さD 50 - ISO 7619-1
Other Standards[S]
伸び率10%時の応力 0.7 MPa DIN 53504
S: These properties are reported by the producer according standards that are different to our defaults.
電気的特性.値単位テスト基準
Other Standards[S]
体積抵抗率 2 Ohm*m IEC 60093
表面抵抗率 400 Ohm IEC 60093
S: These properties are reported by the producer according standards that are different to our defaults.
その他の特性.値単位テスト基準
密度. 1270 kg/m³ ISO 1183
試験片の成形条件.値単位テスト基準
ISO データ
射出成形, 樹脂温度 220 °C ISO 294
射出成形, 金型温度 60 °C ISO 294
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature <80 °C -
Pre-drying - Time 4 - 6 h -
Processing humidity ≤0.02 % -
樹脂温度 210 - 230 °C -
金型温度 40 - 80 °C -
Feed temperature 60 - 80 °C -
Zone 1 210 - 220 °C -
Zone 2 210 - 220 °C -
Zone 3 220 - 230 °C -
Nozzle temperature 220 - 230 °C -
特殊な特性
成形加工法.
射出成形.
特殊な特性.
導電.
耐薬品性
Oil Resistance
アプリケーション
電気電子, パッケージング
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.