Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® 21SPM - PA66 - Ascend

Material Data Center offers the following functions for Vydyne® 21SPM:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Vydyne 21SPM is a general-purpose, unfilled, enhanced crystallization temperature PA66 resin with an alternative lubricant. Designed principally to decrease cycle time for injection-molding fabrication, this product offers a combination of engineering properties characterized by high strength; rigidity; good toughness; high melt point; good surface lubricity; abrasion resistance; and resistance to many chemicals, machine and motor oils, solvents and gasoline.
Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
成形収縮率, 平行 2.0 / * % ISO 294-4, 2577
成形収縮率, 直角 2.0 / * % ISO 294-4, 2577
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 3300 / 1600 MPa ISO 527
降伏応力 88 / 55 MPa ISO 527
降伏ひずみ 5 / 20 % ISO 527
曲げ弾性率, 23°C 3300 / 1050 MPa ISO 178
曲げ強さ 105 / 30 MPa ISO 178
シャルピー衝撃強さ, +23°C N / N kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C N / N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 6 / 23 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C 5 / 7 kJ/m² ISO 179/1eA
ノッチ付きIzod衝撃強さ, +23°C 6 / 23 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ 5 / 7 kJ/m² ISO 180/1A
温度 -30 °C -
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10°C/min 260 / * °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 72 / * °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 210 / * °C ISO 75-1/-2
線膨張係数, 平行 100 / * E-6/K ISO 11359-1/-2
線膨張係数, 直角 100 / * E-6/K ISO 11359-1/-2
1.5mm厚さでの燃焼性 V-2 / * class IEC 60695-11-10
試験片の厚さ 1.5 / * mm -
厚さhでの燃焼性 V-2 / * class IEC 60695-11-10
試験片の厚さ 0.4 / * mm -
酸素指数 26 / * % ISO 4589-1/-2
グローワイヤ燃焼性指数 (GWFI) 960 °C IEC 60695-2-12
GWFI - 試験片の厚さ 0.4 mm -
グローワイヤ燃焼性指数 (GWFI) 960 °C IEC 60695-2-12
GWFI - 試験片の厚さ 0.71 mm -
グローワイヤ燃焼性指数 (GWFI) 960 °C IEC 60695-2-12
GWFI - 試験片の厚さ 1.5 mm -
グローワイヤ着火温度 (GWIT) 825 °C IEC 60695-2-13
GWIT - 試験片の厚さ 0.4 mm -
グローワイヤ着火温度 (GWIT) 850 °C IEC 60695-2-13
GWIT - 試験片の厚さ 0.71 mm -
グローワイヤ着火温度 (GWIT) 850 °C IEC 60695-2-13
GWIT - 試験片の厚さ 1.5 mm -
ASTM数据
UL94 燃焼性 V-2 - UL 94
追加試験片の厚さ 0.4 mm -
電気的特性.乾燥/調湿単位テスト基準
ISO データ
体積抵抗率 1E11 / - Ohm*m IEC 62631-3-1
耐電圧 26 / - kV/mm IEC 60243-1
耐トラッキング性 600 / - - IEC 60112
ASTM数据
耐アーク 150 / - s ASTM D 495
その他の特性.乾燥/調湿単位テスト基準
吸水率 1.2 / * % Sim. to ISO 62
吸湿率 2.4 / * % Sim. to ISO 62
密度 1140 / - kg/m³ ISO 1183
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 70 °C -
Pre-drying - Time 1 - 3 h -
樹脂温度 285 - 300 °C -
金型温度 65 - 95 °C -
Zone 1 260 - 280 °C -
Zone 2 270 - 285 °C -
Zone 3 280 - 290 °C -
Nozzle temperature 280 - 300 °C -
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット., ナチュラルカラー
添加剤.
滑剤., 離型剤.
な特性
Color Stability
耐薬品性
General Chemical Resistance, Solvent Resistance, Oil Resistance
Certifications
Food contact, Food approval 10/2011, Food approval FDA 21 CFR
アプリケーション
電気電子, 汎用
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.