Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® 49H NT - PA66 - Ascend

Material Data Center offers the following functions for Vydyne® 49H NT:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Vydyne 49H NT is a general-purpose, impact-modified, high modulus PA66 resin. 49H NT is recognized for all the processing and property advantages inherent to PA66 with the addition of improved impact strength. This resin offers a well balanced combination of engineering properties characterized by high melt point, good surface lubricity, abrasion resistance and resistance to many chemicals, machine and motor oils, solvents and gasoline.
Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
成形収縮率, 平行 1.8 / * % ISO 294-4, 2577
成形収縮率, 直角 1.6 / * % ISO 294-4, 2577
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 2700 / 1600 MPa ISO 527
降伏応力 75 / 50 MPa ISO 527
降伏ひずみ 5.2 / 18 % ISO 527
曲げ弾性率, 23°C 2600 / 890 MPa ISO 178
曲げ強さ 81 / 27 MPa ISO 178
シャルピー衝撃強さ, +23°C N / N kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C N / N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 13 / 43 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C 11 / 10 kJ/m² ISO 179/1eA
ノッチ付きIzod衝撃強さ, +23°C 10 / 37 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ 9 / 15 kJ/m² ISO 180/1A
温度 -30 °C -
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10°C/min 260 / * °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 69 / * °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 202 / * °C ISO 75-1/-2
線膨張係数, 平行 86 / * E-6/K ISO 11359-1/-2
線膨張係数, 直角 122 / * E-6/K ISO 11359-1/-2
1.5mm厚さでの燃焼性 HB / * class IEC 60695-11-10
試験片の厚さ 1.5 / * mm -
厚さhでの燃焼性 HB / * class IEC 60695-11-10
試験片の厚さ 0.8 / * mm -
グローワイヤ燃焼性指数 (GWFI) 725 °C IEC 60695-2-12
GWFI - 試験片の厚さ 0.75 mm -
グローワイヤ燃焼性指数 (GWFI) 750 °C IEC 60695-2-12
GWFI - 試験片の厚さ 1.5 mm -
グローワイヤ燃焼性指数 (GWFI) 700 °C IEC 60695-2-12
GWFI - 試験片の厚さ 3 mm -
グローワイヤ着火温度 (GWIT) 750 °C IEC 60695-2-13
GWIT - 試験片の厚さ 0.75 mm -
グローワイヤ着火温度 (GWIT) 775 °C IEC 60695-2-13
GWIT - 試験片の厚さ 1.5 mm -
グローワイヤ着火温度 (GWIT) 725 °C IEC 60695-2-13
GWIT - 試験片の厚さ 3 mm -
ASTM数据
UL94 燃焼性 HB - UL 94
追加試験片の厚さ 0.75 mm -
電気的特性.乾燥/調湿単位テスト基準
ISO データ
体積抵抗率 1E9 / - Ohm*m IEC 62631-3-1
耐電圧 14 / - kV/mm IEC 60243-1
耐トラッキング性 525 / - - IEC 60112
ASTM数据
耐アーク 90 / - s ASTM D 495
その他の特性.乾燥/調湿単位テスト基準
吸水率 1.3 / * % Sim. to ISO 62
吸湿率 2.3 / * % Sim. to ISO 62
密度 1110 / - kg/m³ ISO 1183
Processing Recommendation Injection Molding単位テスト基準
Pre-drying - Temperature 80 °C -
Pre-drying - Time 4 h -
樹脂温度 285 - 305 °C -
金型温度 65 - 95 °C -
Zone 1 280 - 310 °C -
Zone 2 280 - 310 °C -
Zone 3 280 - 310 °C -
Nozzle temperature 280 - 310 °C -
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット., ナチュラルカラー
特殊な特性.
高耐衝撃及び耐衝撃改良., 熱安定化.
耐薬品性
General Chemical Resistance, Solvent Resistance, Oil Resistance
アプリケーション
自動車, 電気電子, 汎用
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.