Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® ECO366H BK0734 - PA66 - Ascend

Material Data Center offers the following functions for Vydyne® ECO366H BK0734:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - 熱的特性 - 電気的特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
機械的特性乾燥/調湿単位テスト基準
ISO データ
降伏応力 83 / - MPa ISO 527
破壊ひずみ 4 / - % ISO 527
曲げ弾性率, 23°C 3900 / - MPa ISO 178
曲げ強さ 107 / - MPa ISO 178
シャルピー衝撃強さ, +23°C 75 / - kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30ﾟC 78 / - kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 3.4 / - kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30ﾟC 3.7 / - kJ/m² ISO 179/1eA
アイゾット衝撃試験, +23°C 6 / - kJ/m² ISO 180/1U
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10ﾟC/min 265 / * °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 75 / * °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 240 / * °C ISO 75-1/-2
1.5mm厚さでの燃焼性 V-0 / * class IEC 60695-11-10
試験片の厚さ 1.5 / * mm -
厚さhでの燃焼性 V-0 / * class IEC 60695-11-10
試験片の厚さ 0.4 / * mm -
グローワイヤ燃焼性指数 (GWFI) 960 °C IEC 60695-2-12
GWFI - 試験片の厚さ 0.4 mm -
グローワイヤ燃焼性指数 (GWFI) 960 °C IEC 60695-2-12
GWFI - 試験片の厚さ 0.75 mm -
グローワイヤ燃焼性指数 (GWFI) 960 °C IEC 60695-2-12
GWFI - 試験片の厚さ 1.5 mm -
グローワイヤ着火温度 (GWIT) 960 °C IEC 60695-2-13
GWIT - 試験片の厚さ 0.4 mm -
グローワイヤ着火温度 (GWIT) 960 °C IEC 60695-2-13
GWIT - 試験片の厚さ 0.75 mm -
グローワイヤ着火温度 (GWIT) 800 °C IEC 60695-2-13
GWIT - 試験片の厚さ 1.5 mm -
ASTM数据
UL94 燃焼性 V-0 - UL 94
追加試験片の厚さ 0.4 mm -
電気的特性.乾燥/調湿単位テスト基準
ISO データ
体積抵抗率 1E8 / - Ohm*m IEC 62631-3-1
耐電圧 17 / - kV/mm IEC 60243-1
耐トラッキング性 600 / - - IEC 60112
ASTM数据
耐アーク 150 / - s ASTM D 495
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 80 °C -
Pre-drying - Time 4 h -
樹脂温度 270 - 285 °C -
金型温度 65 - 95 °C -
Zone 1 260 - 290 °C -
Zone 2 260 - 290 °C -
Zone 3 260 - 290 °C -
Nozzle temperature 260 - 290 °C -
特殊な特性
成形加工法.
射出成形.
納入形状.
黒
添加剤.
滑剤., 離型剤.
特殊な特性.
難燃., Halogen-free, 熱安定化.
な特性
Thermal Stability, Homopolymer
耐薬品性
General Chemical Resistance
アプリケーション
自動車, 電気電子
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.