Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® 67B - PA66 - Ascend

Material Data Center offers the following functions for Vydyne® 67B:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Vydyne 67B is a high-viscosity PA66 resin suitable for injection-molding and extrusion applications. It is available in natural color only. 67B resin offers high strength, rigidity and toughness over a broad range of demanding applications and good fluid resistance to a wide variety of chemicals, solvents and oils.
Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
成形収縮率, 平行 2.2 / * % ISO 294-4, 2577
成形収縮率, 直角 2.1 / * % ISO 294-4, 2577
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 2900 / 1900 MPa ISO 527
降伏応力 85 / 55 MPa ISO 527
降伏ひずみ 5 / 20 % ISO 527
シャルピー衝撃強さ, +23°C N / N kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C N / N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 7 / 30 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C 6 / 6 kJ/m² ISO 179/1eA
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10°C/min 260 / * °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 65 / * °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 200 / * °C ISO 75-1/-2
線膨張係数, 平行 100 / * E-6/K ISO 11359-1/-2
線膨張係数, 直角 100 / * E-6/K ISO 11359-1/-2
その他の特性.乾燥/調湿単位テスト基準
吸水率 8.5 / * % Sim. to ISO 62
吸湿率 2.5 / * % Sim. to ISO 62
密度 1140 / - kg/m³ ISO 1183
特殊な特性
成形加工法.
射出成形., 異形押出成形., シート押出成形., その他の押出成形.
納入形状.
ペレット., ナチュラルカラー
な特性
Melt Strength
耐薬品性
General Chemical Resistance, Solvent Resistance, Oil Resistance
Certifications
Food contact, Food approval FDA 21 CFR
アプリケーション
自動車, 汎用, Monofilament, Slit Film
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.