Any use of this information falls under the rules of our
disclaimer.
| Processing/Physical Characteristics | 値 | 単位 | テスト基準 |
| Other Standards[S] |
| 成形収縮率, 平行 |
0.3 |
% |
Producer Method |
| 成形収縮率, 直角 |
0.4 |
% |
Producer Method |
| S: | These properties are reported by the producer according standards that are different to our defaults. |
| 機械的特性 | 値 | 単位 | テスト基準 |
| ISO データ |
| 引張弾性率 |
7300 |
MPa |
ISO 527 |
| 破壊応力 |
110 |
MPa |
ISO 527 |
| 破壊ひずみ |
2.3 |
% |
ISO 527 |
| 曲げ弾性率, 23°C |
7000 |
MPa |
ISO 178 |
| 曲げ強さ |
160 |
MPa |
ISO 178 |
| シャルピー衝撃強さ, +23°C |
40 |
kJ/m² |
ISO 179/1eU |
| ノッチ付きシャルピー衝撃強さ, +23°C |
11 |
kJ/m² |
ISO 179/1eA |
| アイゾット衝撃試験, +23°C |
35 |
kJ/m² |
ISO 180/1U |
| ノッチ付きIzod衝撃強さ, +23°C |
11 |
kJ/m² |
ISO 180/1A |
| 熱的特性 | 値 | 単位 | テスト基準 |
| ISO データ |
| 荷重たわみ温度, 1.80 MPa |
235 |
°C |
ISO 75-1/-2 |
| 荷重たわみ温度, 0.45 MPa |
265 |
°C |
ISO 75-1/-2 |
| 線膨張係数, 平行 |
27 |
E-6/K |
ISO 11359-1/-2 |
| 線膨張係数, 直角 |
58 |
E-6/K |
ISO 11359-1/-2 |
| 1.5mm厚さでの燃焼性 |
HB |
class |
IEC 60695-11-10 |
| 試験片の厚さ |
1.5 |
mm |
- |
| 電気的特性. | 値 | 単位 | テスト基準 |
| ISO データ |
| 耐トラッキング性 |
325 |
- |
IEC 60112 |
| ASTM数据 |
| 耐電圧, 短い時間 |
45 |
kV/mm |
ASTM D 149 |
| 耐アーク |
150 |
s |
ASTM D 495 |
| Other Standards[S] |
| 比誘電率, 1MHz |
2.9 |
- |
IEC 60250 |
| 誘電正接, 1MHz |
10 |
E-4 |
IEC 60250 |
| 体積抵抗率 |
1E14 |
Ohm*m |
IEC 60093 |
| S: | These properties are reported by the producer according standards that are different to our defaults. |
| その他の特性. | 値 | 単位 | テスト基準 |
| 密度. |
1170 |
kg/m³ |
ISO 1183 |
| Processing Recommendation Injection Molding | 値 | 単位 | テスト基準 |
| Pre-drying - Temperature |
120 |
°C |
- |
| Pre-drying - Time |
3 - 5 |
h |
- |
| 樹脂温度 |
280 - 310 |
°C |
- |
| 金型温度 |
130 - 155 |
°C |
- |
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット., 黒
特殊な特性.
高耐衝撃及び耐衝撃改良.
Certifications
Food contact, Drinking water contact, Drinking water contact NSF 61
アプリケーション
自動車, 電気電子
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com
