Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Bakelite® PF 13 - PF-P - Bakelite Synthetics

Check here, which other Bakelite datasheets, application examples or technical articles are available in Material Data Center

機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 試験片の成形条件. - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

Product description:

Phenolic moulding compound, inorganically mica filled, heat resistant, good electrical properties, UL listed moulding compound 0.75 mm / V-1 (NC), 3,0 mm / V-0(NC), standardized moulding compound.

Application areas:

Electric motor slip ring commutators, commutators (adjustment motors, starter motors truck, vacuum cleaners, kitchen devices, electrical tools, electrical vehicles), bobbins.

Property Name	Value	Unit	Standard No.
Apparent density (moulding compound)	0.65	g/cm³	ISO 60
Moulding shrinkage (compression moulding, longitudinal)	0.02	%	ISO 2577
Post shrinkage (compression moulding, 168h/110°C)	0.02	%	ISO 2577
Compr. strength (test spec. flat tested)	135	MPa	ISO 604
Flexural strength (2mm/min)	90	MPa	ISO 178
Flexural modulus	23500	MPa	ISO 178
Ball indentation hardness (H 961/30)	430	MPa	ISO 2039/P1
Water absorption (24h/23°C)	10	mg	similar to ISO 62

Additional characteristics:

preparation of test specimen only in compression moulding process

Preparation of Test Specimens of Thermosetting Moulding Compound

• Compression to ISO 295
• Injection to ISO 10724

Storage capability
2 years (relative humidity of 50-60% and maximum storage temperature of approximately 20°C)

機械的特性	値	単位	テスト基準
ISO データ
シャルピー衝撃強さ, +23°C	3	kJ/m²	ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C	2	kJ/m²	ISO 179/1eA

熱的特性	値	単位	テスト基準
ISO データ
荷重たわみ温度, 8.00 MPa	165	°C	ISO 75-1/-2

電気的特性.	値	単位	テスト基準
ISO データ
比誘電率, 100Hz	5	-	IEC 62631-2-1
誘電正接, 100Hz	0.04	E-4	IEC 62631-2-1
体積抵抗率	1E10	Ohm*m	IEC 62631-3-1
表面抵抗率	1E11	Ohm	IEC 62631-3-2
耐電圧	33	kV/mm	IEC 60243-1
耐トラッキング性	175	-	IEC 60112

その他の特性.	値	単位	テスト基準
密度	1850	kg/m³	ISO 1183

試験片の成形条件.	値	単位	テスト基準
ISO データ
射出成形, 樹脂温度	115	°C	ISO 10724
射出成形, 射出速度	170	mm/s	ISO 10724
射出成形, 保圧	100	MPa	ISO 10724
射出成形, 硬化時間	25	min	ISO 10724
圧縮成形, 金型温度	160	°C	ISO 295
圧縮成形, 硬化時間	1	min	ISO 295

機能

特殊な特性

成形加工法.

射出成形., トランスファー成形.

領域別の利用可能性

北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ

その他の情報

村遜速揃

VERARBEITUNG 

Temperature of material:	105 - 115	°C
Mould temperature:	160 - 190	°C
Curing time:	10-20	sec
Further Information:
Barrel temperature
- Feed zone:	60-75	°C
- Nozzle zone:	80-100	°C
Cavity moulding pressure:	>15	MPa
Back pressure:	0.5-2	MPa
Holding pressure:	60% of injection pressure

属袖遜速揃

PROCESSING

Mould temperature:	160-190	°C
Curing time:	20-40	sec
Cavity moulding pressure:	>15	MPa

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.