Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Bormed™ TD109CF - PP - Borealis A/S

Material Data Center offers the following functions for Bormed™ TD109CF:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Bormed datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 光学特性 - 機械的特性(ィルム)
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトフローレート, MFI 6 g/10min ISO 1133
温度 230 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ISO データ
曲げ弾性率, 23°C 700 MPa ISO 178
熱的特性値単位テスト基準
ISO データ
溶融温度, 10ﾟC/min 131 °C ISO 11357-1/-3
光学特性値単位テスト基準
ASTM数据
光沢度 130 - ASTM D 2457
ヘイズ 0.5 % ASTM D 1003
機械的特性(ィルム)値単位テスト基準
ISO データ
引張弾性率, 平行 470 MPa ISO 527-3
引張弾性率, 直角 490 MPa ISO 527-3
最大ひずみ, 平行 450 % ISO 527-3
最大ひずみ, 直角 470 % ISO 527-3
動摩擦係数. 0.7 - ISO 8295
試験片の厚さ. 0.05 mm -
特殊な特性
成形加工法.
Blown Film Extrusion, フィルム押出成形.
な特性
Heat Sealable, Copolymer
Certifications
Food contact, Food approval FDA 21 CFR, Medical Grade, US Pharmacopeia Class VI Approved, Device Master File
アプリケーション
医療の, パッケージング
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.