Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastollan® C 75 A HPM - (TPU-ARES) - BASF Polyurethanes GmbH

Check here, which other Elastollan datasheets, application examples or technical articles are available in Material Data Center

機械的特性 - その他の特性. - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

DESCRIPTION
Elastollan C 75 A HPM is a polyester based TPU

SPECIAL PROPERTIES
high tensile strength, excellent tear strength,
very good damping behavior, good rebound elasticity,
very good wear performance, good flexibility at low temperature and
resistance to hydrolysis, improved heat distortion temperature

TYPICAL APPLICATIONS
technical parts, sealing bellows
OTHER HINTS
predrying: 2-3h at ca. 80°C (dehumidified air dryer),
max. content of humidity before processing: 0,02%
annealing: 20 h at 100°C in order to get optimum properties

CHEMICAL RESISTANCE
For detailed information on the chemical resistance of our
materials refer to this list of chemical resistance

機械的特性	値	単位	テスト基準
ISO データ
伸び率300%時の応力	6	MPa	ISO 527
破壊応力 TPE	50	MPa	ISO 527
破壊ひずみ TPE	>300	%	ISO 527
圧縮永久ひずみ 23℃, 24h	25	%	ISO 815
圧縮永久ひずみ 70℃, 24h	35	%	ISO 815
圧縮永久ひずみ 100℃, 24h	50	%	ISO 815
引裂強さ	45	kN/m	ISO 34-1
耐摩耗性	50	mm³	ISO 4649
ショア硬さA	75	-	ISO 7619-1

その他の特性.	値	単位	テスト基準
密度	1180	kg/m³	ISO 1183

機能

特殊な特性

成形加工法.

射出成形., 異形押出成形., ブロー成形.

領域別の利用可能性

北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.