Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ERACLENE® MS 80 U - (PE-HD) - Versalis S.p.A

Material Data Center offers the following functions for ERACLENE® MS 80 U:
unit conversion, PDF datasheet print, comparison with other plastics, flow length calculation, snap fit calculation, beam deflection calculation, cooling time calculation, parameters for material models, CAE Interfaces

Check here, which other Eraclene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - 機能
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Eraclene MS 80 U is a gas phase HDPE with antioxidants, suitable for injection moulding process. 
Due to a narrow molecular weight distribution and a high fluidity the grade is ideal for injection moulding applications.
The polymer has a high thermal stability during the extrusion and a good balance between fluidity and mechanical properties.

Applications
Thin-walled (food containers), pharmaceutical and healthcare, aersol cup.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 27 cm³/10min ISO 1133
温度 190 °C -
荷重 2.16 kg -
溶融時の密度 733 kg/m³ -
溶融時の熱伝導率 0.39 W/(m K) -
溶融時の比熱 2630 J/(kg K) -
突き出し時の時の温度 106 °C -
機械的特性値単位テスト基準
ISO データ
引張弾性率 1300 MPa ISO 527
降伏応力 27 MPa ISO 527
降伏ひずみ 10 % ISO 527
破壊呼びひずみ >50 % ISO 527
ショア硬さD 66 - ISO 7619-1
熱的特性値単位テスト基準
ISO データ
溶融温度, 10°C/min 132 °C ISO 11357-1/-3
ガラス転移点, 10°C/min 118 °C ISO 11357-1/-2
線膨張係数, 平行 152 E-6/K ISO 11359-1/-2
その他の特性.値単位テスト基準
密度 955 kg/m³ ISO 1183
機能
粘度せん断速度. , ERACLENE® MS 80 U, (PE-HD), Versalis
せん断応力-せん断速度. , ERACLENE® MS 80 U, (PE-HD), Versalis
pvT , ERACLENE® MS 80 U, (PE-HD), Versalis
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット.
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
その他の情報
村遜速揃

#2

Typical processing temperature range:

    Melt temperature         190 - 260 °C

    Mold temperature          10-  40  °C

Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.