Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ferrex GPP35CS68UL black - PP-K36 - LyondellBasell Industries

Material Data Center offers the following functions for Ferrex GPP35CS68UL black:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ferrex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics単位テスト基準
ASTM数据
メルトフローレイト, MFI 7.5 g/10min ASTM D 1238
温度 230 °C -
荷重 2.16 kg -
機械的特性単位テスト基準
ASTM数据
引張強度 19.3 MPa ASTM D 638
破断伸び 80 % ASTM D 638
曲げ弾性率 1531 MPa ASTM D 790
曲げ強さ 32.4 MPa ASTM D 790
Gardner衝撃 31.6 J ASTM D 2794,4226,5420
ノッチ付きIzod衝撃強さ, 1/8 in 267 J/m ASTM D 256
アイゾット衝撃試験, 1/8 in 1280 J/m ASTM D 256
熱的特性単位テスト基準
ASTM数据
DTUL @ 66 psi 90.6 °C ASTM D 648
DTUL @ 264 psi 54.4 °C ASTM D 648
その他の特性.単位テスト基準
密度 1190 kg/m³ ASTM D 792
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット., 黒
特殊な特性.
高耐衝撃及び耐衝撃改良.
な特性
High Gloss
アプリケーション
自動車
領域別の利用可能性
北アメリカ., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.