Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Flexus 9200 - (PE-LLD) - Braskem

Material Data Center offers the following functions for Flexus 9200:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Flexus datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 光学特性 - その他の特性. - 機械的特性(ィルム)
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 1 g/10min ASTM D 1238
温度 190 °C -
荷重 2.16 kg -
光学特性値単位テスト基準
ASTM数据
光沢度 100 - ASTM D 2457
ヘイズ 9 % ASTM D 1003
その他の特性.値単位テスト基準
密度 917 kg/m³ ASTM D 792
機械的特性(ィルム)値単位テスト基準
ASTM Data
破壊応力, 平行 40 MPa ASTM D 882
破壊応力, 直角 45 MPa ASTM D 882
破断伸び, 平行 960 % ASTM D 882
破断伸び, 直角 1090 % ASTM D 882
押出成形のタイプ cast - -
試験片の厚さ 0.07 mm -
特殊な特性
成形加工法.
フィルム押出成形., ブロー成形.
特殊な特性.
高耐衝撃及び耐衝撃改良.
な特性
Blending Resin
耐薬品性
Oxidation Resistance
Certifications
Food contact, Food approval FDA 21 CFR
アプリケーション
パッケージング
領域別の利用可能性
北アメリカ., ヨーロッパ., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.