Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FORTRON® ICE 504L - PPS-GF40 - Celanese

Check here, which other Fortron datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

FORTRON ICE 504L is a 40% glass fiber reinforced polyphenylene sulfide, that belongs to our new generation of Fortron® PPS.
This new technology allows optimization of molding conditions with faster cycle times. Due to the faster crystallization of the material at a higher temperature, the option of mold wall temperature reduction can be subject of advanced process optimization. The potential for optimization of Fortron® ICE by cycle time reduction is possible by standard cavity surface temperatures of 140°C. The potential for lowering the mold temperature must be checked individually and it depends on process and part design.
 

Flammability @1.6mm nom. thickn.	V-0	-
Flammability at thickness h (0.38 mm)	V-0	-

Processing/Physical Characteristics	値	単位	テスト基準
ISO データ
成形収縮率, 平行	0.3	%	ISO 294-4, 2577
成形収縮率, 直角	0.6	%	ISO 294-4, 2577
溶融時の比熱	1500	J/(kg K)	-

機械的特性	値	単位	テスト基準
ISO データ
引張弾性率	15100	MPa	ISO 527
破壊応力	202	MPa	ISO 527
破壊ひずみ	1.9	%	ISO 527
シャルピー衝撃強さ, +23°C	53	kJ/m²	ISO 179/1eU
シャルピー衝撃強さ, -30°C	53	kJ/m²	ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C	10	kJ/m²	ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C	10	kJ/m²	ISO 179/1eA

熱的特性	値	単位	テスト基準
ISO データ
溶融温度, 10°C/min	280	°C	ISO 11357-1/-3
ガラス転移点, 10°C/min	90	°C	ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa	270	°C	ISO 75-1/-2
荷重たわみ温度, 8.00 MPa	215	°C	ISO 75-1/-2
線膨張係数, 平行	26	E-6/K	ISO 11359-1/-2
線膨張係数, 直角	42	E-6/K	ISO 11359-1/-2
1.5mm厚さでの燃焼性	V-0	class	IEC 60695-11-10
試験片の厚さ	1.5	mm	-
厚さhでの燃焼性	V-0	class	IEC 60695-11-10
試験片の厚さ	0.4	mm	-
酸素指数	47	%	ISO 4589-1/-2

電気的特性.	値	単位	テスト基準
ISO データ
比誘電率, 1MHz	4.1	-	IEC 62631-2-1
誘電正接, 1MHz	20	E-4	IEC 62631-2-1
体積抵抗率	>1E13	Ohm*m	IEC 62631-3-1
表面抵抗率	>1E15	Ohm	IEC 62631-3-2

その他の特性.	値	単位	テスト基準
吸水率	0.02	%	Sim. to ISO 62
密度	1650	kg/m³	ISO 1183

機能

特殊な特性

成形加工法.

射出成形.

納入形状.

ペレット.

添加剤.

離型剤.

Certifications

Drinking water contact

領域別の利用可能性

北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ.

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.