Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hylex® P1325L - PC - Ravago Manufacturing Americas

Material Data Center offers the following functions for Hylex® P1325L:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hylex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - 光学特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 32 g/10min ASTM D 1238
温度 300 °C -
荷重 1.2 kg -
成形収縮率., 平行 0.006 mm/mm ASTM D 955
機械的特性値単位テスト基準
ASTM数据
引張強度 66.9 MPa ASTM D 638
破断伸び 120 % ASTM D 638
曲げ弾性率 2070 MPa ASTM D 790
曲げ強さ 86.2 MPa ASTM D 790
ロックウェル硬度 M 80 - ASTM D 785
ノッチ付きIzod衝撃強さ, 1/8 in 640 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 99 J/m ASTM D 256
温度 -30 °C -
熱的特性値単位テスト基準
ASTM数据
UL94 燃焼性 V-2 - UL 94
追加試験片の厚さ 0.508 mm -
DTUL @ 66 psi 132 °C ASTM D 648
DTUL @ 264 psi 126 °C ASTM D 648
ビカット軟化温度 152 °C ASTM D 1525
電気的特性.値単位テスト基準
ASTM数据
耐電圧, 短い時間 16 kV/mm ASTM D 149
体積抵抗率 >1E15 Ohm*cm ASTM D 257
耐アーク 120 s ASTM D 495
光学特性値単位テスト基準
ASTM数据
ヘイズ 0.65 % ASTM D 1003
視感透過率 90 % ASTM D 1003
くっせつりつ 1.58 - ASTM D 542
その他の特性.値単位テスト基準
吸水率, 24hr 0.15 % ASTM D 570
密度 1200 kg/m³ ASTM D 792
特殊な特性
納入形状.
ペレット.
添加剤.
離型剤.
特殊な特性.
紫外線安定化.
領域別の利用可能性
北アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.