Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of K-Resin® ECO KR03 - SB - INEOS Styrolution

Material Data Center offers the following functions for K-Resin® ECO KR03:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other K-Resin datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 光学特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Attributed Content of ISCC-certified Bio-Circular Sources (min.): 60 %
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 7.5 g/10min ASTM D 1238
温度 200 °C -
荷重 5 kg -
機械的特性値単位テスト基準
ASTM数据
引張弾性率 1517 MPa ASTM D 638
降伏応力 26.2 MPa ASTM D 638
破断伸び 230 % ASTM D 638
曲げ弾性率 1793 MPa ASTM D 790
曲げ強さ 37.2 MPa ASTM D 790
ショア硬さD 63 - ASTM D 2240
Other Standards[S]
破壊呼びひずみ 170 %
S: These properties are reported by the producer according standards that are different to our defaults.
熱的特性値単位テスト基準
ASTM数据
DTUL @ 264 psi 62.2[ann.] °C ASTM D 648
ビカット軟化温度 85 °C ASTM D 1525
ann.: annealed
光学特性値単位テスト基準
ASTM数据
光沢度 162 - ASTM D 2457
ヘイズ 1 % ASTM D 1003
視感透過率 92 % ASTM D 1003
その他の特性.値単位テスト基準
密度 1010 kg/m³ ASTM D 792
特殊な特性
成形加工法.
射出成形., シート押出成形., ブロー成形., 熱成形.
納入形状.
ペレット.
特殊な特性.
高耐衝撃及び耐衝撃改良., 透明.
な特性
Blending Resin, High Gloss
Certifications
Contains renewable resources, Food contact, ISCC Plus
アプリケーション
医療の, パッケージング, おもちゃ
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.