Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Kocetal® KH702GN - POM - Kolon Industries

Material Data Center offers the following functions for Kocetal® KH702GN:
unit conversion, PDF datasheet print

Check here, which other Kocetal datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 42 g/10min ASTM D 1238
成形収縮率., 平行 0.023 mm/mm ASTM D 955
機械的特性値単位テスト基準
ASTM数据
引張強度 60 MPa ASTM D 638
破断伸び 50 % ASTM D 638
曲げ弾性率 2500 MPa ASTM D 790
曲げ強さ 85 MPa ASTM D 790
ロックウェル硬度 M 80 - ASTM D 785
ノッチ付きIzod衝撃強さ, 1/8 in 50 J/m ASTM D 256
熱的特性値単位テスト基準
ASTM数据
UL94 燃焼性 HB - UL 94
線膨張係数, 平行 130 E-6/K ASTM D 696
DTUL @ 66 psi 158 °C ASTM D 648
DTUL @ 264 psi 110 °C ASTM D 648
溶融温度 166 °C ASTM D 3418
ビカット軟化温度 162 °C ASTM D 1525
電気的特性.値単位テスト基準
ASTM数据
耐電圧, 短い時間 19 kV/mm ASTM D 149
誘電正接, 1 MHz 0.006 - ASTM D 150
表面抵抗率 >1E15 Ohm ASTM D 257
体積抵抗率 1E14 Ohm*cm ASTM D 257
その他の特性.値単位テスト基準
密度 1410 kg/m³ ASTM D 792
特殊な特性
領域別の利用可能性
北アメリカ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.