Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEONA™ 1542 BK - PA66 - Asahi Kasei

Material Data Center offers the following functions for LEONA™ 1542 BK:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Leona datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 3300 / 1300 MPa ISO 527
降伏応力 78 / 52 MPa ISO 527
降伏ひずみ 4 / 27 % ISO 527
曲げ弾性率, 23°C 2900 / 1200 MPa ISO 178
曲げ強さ 114 / 46 MPa ISO 178
シャルピー衝撃強さ, +23°C N / N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 6 / 18 kJ/m² ISO 179/1eA
熱的特性乾燥/調湿単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 64 / * °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 201 / * °C ISO 75-1/-2
ASTM数据
線膨張係数, 平行 70 E-6/K ASTM D 696
その他の特性.乾燥/調湿単位テスト基準
吸湿率 2.4 / * % Sim. to ISO 62
密度 1170 / - kg/m³ ISO 1183
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 80 - 90 °C -
Pre-drying - Time 2 - 3 h -
樹脂温度 270 - 290 °C -
金型温度 75 - 85 °C -
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット., 黒
特殊な特性.
熱安定化.
な特性
Tribologic Grade
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.