Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LIGHTER™ C88 - PET - Equipolymers Global

Material Data Center offers the following functions for LIGHTER™ C88:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lighter datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - 熱的特性 - その他の特性. - 材料特有の特性 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
For more detailed information, please read our brochure p. 46 to 54
or contact our representatives in your region.
機械的特性値単位テスト基準
ISO データ
引張弾性率 2300 MPa ISO 527
降伏応力 55 MPa ISO 527
降伏ひずみ 4 % ISO 527
破壊応力 24 MPa ISO 527
破壊ひずみ 250 % ISO 527
曲げ弾性率, 23°C 2100 MPa ISO 178
ノッチ付きIzod衝撃強さ, +23°C 4.5 kJ/m² ISO 180/1A
熱的特性値単位テスト基準
ISO データ
溶融温度, 10ﾟC/min 247 °C ISO 11357-1/-3
ガラス転移点, 10ﾟC/min 78 °C ISO 11357-1/-2
ビカット軟化温度, B 77 °C ISO 306
線膨張係数, 平行 83 E-6/K ISO 11359-1/-2
その他の特性.値単位テスト基準
Intrinsic Viscosity 0.76 dl/g -
アセトアルデヒド 1 ppm -
Color b 1 - CIE
Crystallinity 50 % -
Moisture Content 0.4 % -
Bulk density 880 kg/m³ -
材料特有の特性値単位テスト基準
ISO データ
粘度数. 88 cm³/g ISO 307, 1157, 1628
Processing Recommendation Injection Molding値単位テスト基準
樹脂温度 277 °C -
金型温度 20 °C -
特殊な特性
成形加工法.
射出成形., シート押出成形., ブロー成形., 熱成形.
Certifications
Food contact
アプリケーション
パッケージング
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.