Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Luminy® LX130U - PLA - TotalEnergies Corbion

Material Data Center offers the following functions for Luminy® LX130U:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Luminy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトフローレート, MFI 7 g/10min ISO 1133
温度 190 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 3500 MPa ISO 527
引張強度 45 MPa ISO 527
破壊ひずみ 5 % ISO 527
ノッチ付きシャルピー衝撃強さ, +23°C 5 kJ/m² ISO 179/1eA
熱的特性値単位テスト基準
ISO データ
溶融温度, 10ﾟC/min 152 °C ISO 11357-1/-3
ガラス転移点, 10ﾟC/min 57 °C ISO 11357-1/-2
荷重たわみ温度, 0.45 MPa 57 °C ISO 75-1/-2
その他の特性.値単位テスト基準
密度. 1240 kg/m³ ISO 1183
Moisture Content 0.04 % -
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 85 °C -
Pre-drying - Time 4 - 6 h -
Processing humidity ≤0.01 % -
樹脂温度 180 - 220 °C -
金型温度 20 - 30 °C -
Feed temperature 155 - 175 °C -
Zone 2 180 - 220 °C -
Zone 3 180 - 220 °C -
Nozzle temperature 180 - 220 °C -
Back pressure 5 - 10 MPa -
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット.
特殊な特性.
透明.
な特性
Amorphous
Certifications
Contains renewable resources, Food contact, Food approval 10/2011, Food approval FDA 21 CFR, 堆肥化可能 ISO 13432 (プロデューサー), 堆肥化可能 ASTM D6400 (プロデューサー), 堆肥化可能 ISO 13432 (証明書), 堆肥化可能 ASTM D6400 (証明書)
領域別の利用可能性
北アメリカ., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.