Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUPOY PC 1303EP-22 - PC - LG Chem

Material Data Center offers the following functions for LUPOY PC 1303EP-22:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lupoy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 光学特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 22 g/10min ASTM D 1238
温度 300 °C -
荷重 1.2 kg -
成形収縮率., 平行 0.006 mm/mm ASTM D 955
機械的特性値単位テスト基準
ISO データ
引張弾性率 2270 MPa ISO 527
降伏応力 63 MPa ISO 527
降伏ひずみ 6 % ISO 527
破壊応力 60 MPa ISO 527
破壊ひずみ 90 % ISO 527
曲げ弾性率, 23°C 2410 MPa ISO 178
曲げ強さ 96 MPa ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C 45 kJ/m² ISO 179/1eA
アイゾット衝撃試験, +23°C N kJ/m² ISO 180/1U
ノッチ付きIzod衝撃強さ, +23°C 927 kJ/m² ISO 180/1A
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 128 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 142[ann.] °C ISO 75-1/-2
ビカット軟化温度, B 146 °C ISO 306
ASTM数据
線膨張係数, 平行 68 E-6/K ASTM D 696
ann.: annealed
光学特性値単位テスト基準
ASTM数据
ヘイズ 1.1 % ASTM D 1003
視感透過率 89 % ASTM D 1003
くっせつりつ 1.59 - ASTM D 542
その他の特性.値単位テスト基準
吸水率, 24hr 0.15 % ASTM D 570
吸水率, 平衡 0.32 % ASTM D 570
密度 1200 kg/m³ ASTM D 792
特殊な特性
成形加工法.
射出成形., その他の押出成形.
添加剤.
離型剤.
特殊な特性.
高耐衝撃及び耐衝撃改良., 紫外線安定化., 熱安定化., 透明.
アプリケーション
自動車
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.