Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Luran® ECO 388S BC60 - SAN - INEOS Styrolution

Check here, which other Luran datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 光学特性 - その他の特性. - Processing Recommendation Injection Molding - Processing Recommendation Extrusion - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

Luran® ECO 388S BC60 is a specialty grade of SAN with enhanced chemical resistance and the highest mechanical strength. It is suitable for injection molding and extrusion applications. Luran® ECO 388S BC60 is an ISCC compliant product leading to a substitution of fossil source styrene with ISCC certified bio-attributed styrene.

Carbon Footprint Reduction vs Fossil-Based (3rd party validated): 77 % (ISO 14044)
Attributed Content of ISCC-certified Bio-Circular Sources (min.): 60 %

Processing/Physical Characteristics	値	単位	テスト基準
ISO データ
メルトボリュームレイト, MVR	7	cm³/10min	ISO 1133
温度	220	°C	-
荷重	10	kg	-
成形収縮率, 平行	0.5	%	ISO 294-4, 2577
溶融時の熱伝導率	0.17	W/(m K)	-

機械的特性	値	単位	テスト基準
ISO データ
引張弾性率	3800	MPa	ISO 527
破壊応力	79	MPa	ISO 527
破壊ひずみ	4	%	ISO 527
曲げ弾性率, 23°C	3670	MPa	ISO 178
曲げ強さ	140	MPa	ISO 178
シャルピー衝撃強さ, +23°C	21	kJ/m²	ISO 179/1eU
シャルピー衝撃強さ, -30°C	19	kJ/m²	ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C	2.5	kJ/m²	ISO 179/1eA
ノッチ付きIzod衝撃強さ, +23°C	2.5	kJ/m²	ISO 180/1A
Ball indentation hardness	175	MPa	ISO 2039-1

熱的特性	値	単位	テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa	101	°C	ISO 75-1/-2
荷重たわみ温度, 0.45 MPa	102	°C	ISO 75-1/-2
ビカット軟化温度, B	107	°C	ISO 306
線膨張係数, 平行	70	E-6/K	ISO 11359-1/-2
Other Standards[S]
熱伝導率, ソリッド	0.17	W/(m K)	DIN 52612-1

S:	These properties are reported by the producer according standards that are different to our defaults.

光学特性	値	単位	テスト基準
ASTM数据
ヘイズ	1	%	ASTM D 1003
視感透過率	89	%	ASTM D 1003
Other Standards[S]
くっせつりつ	1.56	-	ISO 489

S:	These properties are reported by the producer according standards that are different to our defaults.

その他の特性.	値	単位	テスト基準
吸湿率	0.3	%	Sim. to ISO 62
密度	1080	kg/m³	ISO 1183
Bulk density	600	kg/m³	-

Processing Recommendation Injection Molding	値	単位	テスト基準
Pre-drying - Temperature	80	°C	-
Pre-drying - Time	2 - 4	h	-
樹脂温度	220 - 260	°C	-
金型温度	40 - 80	°C	-
Injection speed	200	mm/s	-

Processing Recommendation Extrusion	値	単位	テスト基準
Type of extrusion	profile	-	-
Pre-drying - Temperature	80	°C	-
Pre-drying - Time	2 - 4	h	-
樹脂温度	240	°C	-
Type of extrusion	sheet	-	-
Pre-drying - Temperature	80	°C	-
Pre-drying - Time	2 - 4	h	-
樹脂温度	220 - 240	°C	-

機能

特殊な特性

成形加工法.

射出成形., 異形押出成形., シート押出成形., その他の押出成形., 熱成形.

納入形状.

ペレット.

特殊な特性.

熱安定化., 透明.

耐薬品性

General Chemical Resistance

Certifications

Contains renewable resources, Food contact, ISCC Plus

アプリケーション

電気電子

領域別の利用可能性

北アメリカ., ヨーロッパ., アジア/太平洋地域., 近東/アフリカ

その他の情報

村遜速揃

PREPROCESSING

Pre-drying, Temperature: 80°C

Pre-drying, Time: 2 - 4h

PROCESSING

Melt temperature, range: 220 - 260°C

Mold temperature, range: 40 - 80°C

その他の押出成形.

PREPROCESSING

Pre-drying, Temperature: 80°C

Pre-drying, Time: 2 - 4h

PROCESSING

Prepreg, Melt temperature: 220 - 240°C

Pipes, Melt temperature: 220 - 240°C

族臓遜造揃

PREPROCESSING

Pre-drying, Temperature: 80°C

Pre-drying, Time: 2 - 4h

PROCESSING

Profiles, Melt temperature: 240°C

促揃臓村促速揃

PREPROCESSING

Pre-drying, Temperature: 80°C

Pre-drying, Time: 2 - 4h

PROCESSING

Plates, Melt temperature: 220 - 240°C

耐薬品性

酸
	5wt％酢酸 (23ﾟC)
	10wt％クエン酸 (23ﾟC)
	10wt％乳酸 (23ﾟC)
	36wt％塩酸 (23ﾟC)
	40wt％硝酸 (23ﾟC)
	38wt％硫酸 (23ﾟC)
	5wt％硫酸 (23ﾟC)
	40wt％硝酸 (23ﾟC)
塩基
	35wt％水酸化ナトリウム (23ﾟC)
	1wt％水酸化ナトリウム (23ﾟC)
	10wt％水酸化アンモニウム (23ﾟC)
アルコール
	イソプロピルアルコール23℃ (23ﾟC)
	メタノール　23℃ (23ﾟC)
	エタノール　23℃ (23ﾟC)
炭化水素
	ヘキサン (23ﾟC)
	トルエン (23ﾟC)
	イソオクタン (23ﾟC)
ケトン系溶剤
	アセトン (23ﾟC)
エーテル溶剤
	ジエチルエーテル (23ﾟC)
標準燃料
	ディーゼル燃料（ISO 1817液F) (23ﾟC)
食塩水
	10wt％塩化ナトリウム (23ﾟC)
	10wt％次亜塩素酸ナトリウム (23ﾟC)
	20wt％炭酸ナトリウム (23ﾟC)
	2wt％炭酸ナトリウム (23ﾟC)
	50wt％ジンクロメート (23ﾟC)
その他
	エチルアセテート (23ﾟC)
	過酸化水素 (23ﾟC)
	1wt%ノニルフェノキシ-ポリエチレノキシ-エタノール水... (23ﾟC)
	水 (23ﾟC)

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.