Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUVOCOM 1105/XCF/15 - PEEK-CF - LEHVOSS Group

Material Data Center offers the following functions for LUVOCOM 1105/XCF/15:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Luvocom datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
成形収縮率, 平行 0.2 % ISO 294-4, 2577
機械的特性値単位テスト基準
ISO データ
引張弾性率 18000 MPa ISO 527
引張強度 255 MPa ISO 527
曲げ弾性率, 23°C 15000 MPa ISO 178
シャルピー衝撃強さ, +23°C 65 kJ/m² ISO 179/1eU
電気的特性.値単位テスト基準
ISO データ
表面抵抗率 1000000 Ohm IEC 62631-3-2
その他の特性.値単位テスト基準
密度. 1350 kg/m³ ISO 1183
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 150 °C -
Pre-drying - Time 3 - 6 h -
Processing humidity ≤0.05 % -
樹脂温度 390 °C -
金型温度 170 - 200 °C -
Zone 1 360 - 370 °C -
Zone 2 380 - 390 °C -
Zone 3 390 - 400 °C -
Nozzle temperature 360 - 380 °C -
特殊な特性
成形加工法.
射出成形.
納入形状.
黒
特殊な特性.
導電., 難燃.
耐薬品性
General Chemical Resistance, Hydrolytically Stable
アプリケーション
航空宇宙, 自動車, 医療の
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.