Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Makroblend® AR205 - (PC+PET)-I - Covestro Deutschland AG

Material Data Center offers the following functions for Makroblend® AR205:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Makroblend datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - 試験片の成形条件. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
  • (PC PET) blend, easy flow, impact modified
  • application: automotive body panels
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 38 cm³/10min ISO 1133
温度 270 °C -
荷重 5 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 2200 MPa ISO 527
降伏応力 54 MPa ISO 527
降伏ひずみ 4.8 % ISO 527
破壊呼びひずみ >50 % ISO 527
シャルピー衝撃強さ, +23°C N kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 45 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C 20 kJ/m² ISO 179/1eA
パンクチャー衝撃－最大応力, +23°C 3900 N ISO 6603-2
パンクチャー衝撃－最大応力, -30°C 5000 N ISO 6603-2
パンクチャー衝撃エネルギー, +23°C 42 J ISO 6603-2
パンクチャー衝撃エネルギー, -30ﾟC 48 J ISO 6603-2
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 98 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 126 °C ISO 75-1/-2
線膨張係数, 平行 81 E-6/K ISO 11359-1/-2
線膨張係数, 直角 82 E-6/K ISO 11359-1/-2
その他の特性.値単位テスト基準
密度 1210 kg/m³ ISO 1183
試験片の成形条件.値単位テスト基準
ISO データ
射出成形, 樹脂温度 270 °C ISO 294
射出成形, 金型温度 70 °C ISO 294
射出成形, 射出速度 200 mm/s ISO 294
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 110 °C -
Pre-drying - Time 2 - 4 h -
Processing humidity ≤0.01 % -
樹脂温度 260 - 280 °C -
金型温度 60 - 80 °C -
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット.
添加剤.
離型剤.
特殊な特性.
高耐衝撃及び耐衝撃改良.
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
その他の情報
村遜速揃
PREPROCESSING
Max. Water content: 0.01 %
Drying temperature: 110 °C
Drying time:
Circulating air drying oven (50 % fresh air) 4-12 h
Fresh air dryer (high speed dryer) 2-4 h
Dry air dryer 2-4 h

PROCESSING
Melt temperature: 260-280 °C
Mold temperature: 60-80 °C

Use open nozzle.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.