Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Moplen EP649N - PP - PolyMirae

Material Data Center offers the following functions for Moplen EP649N:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Moplen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトフローレート, MFI 10 g/10min ISO 1133
温度 230 °C -
ASTM数据
メルトフローレイト, MFI 10 g/10min ASTM D 1238
温度 230 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ISO データ
降伏応力 32 MPa ISO 527
降伏ひずみ 6 % ISO 527
曲げ弾性率, 23°C 1750 MPa ISO 178
シャルピー衝撃強さ, +23°C 135 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 6 kJ/m² ISO 179/1eA
ASTM数据
降伏応力 31.4 MPa ASTM D 638
降伏点伸び 7 % ASTM D 638
曲げ弾性率 1815 MPa ASTM D 790
ロックウェル硬度 R 105 - ASTM D 785
ノッチ付きIzod衝撃強さ, 1/8 in 94.2 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 37.5 J/m ASTM D 256
温度 -20 °C -
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 0.45 MPa 102 °C ISO 75-1/-2
ASTM数据
DTUL @ 66 psi 130 °C ASTM D 648
その他の特性.値単位テスト基準
密度. 900 kg/m³ ISO 1183
密度 900 kg/m³ ASTM D 792
特殊な特性
特殊な特性.
帯電防止.
な特性
Copolymer
Certifications
Food contact, Food approval FDA 21 CFR
アプリケーション
冷凍
領域別の利用可能性
アジア/太平洋地域., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.