Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of POLYFLAM® RPP 374 ND CS1 5V - PP-T20 FR(17) - LyondellBasell Industries

Material Data Center offers the following functions for POLYFLAM® RPP 374 ND CS1 5V:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Polyflam datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
商品の説明文
20% talc filled flame retardant PP-homopolymer without PBDE; UL94 5V at 2mm wall thickness

Processing/Physical Characteristics単位テスト基準
ISO データ
メルトボリュームレイト, MVR 5 cm³/10min ISO 1133
温度 230 °C -
荷重 2.16 kg -
機械的特性単位テスト基準
ISO データ
引張弾性率 3700 MPa ISO 527
降伏応力 27 MPa ISO 527
降伏ひずみ 2 % ISO 527
シャルピー衝撃強さ, +23°C 12 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C 12 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 2 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C 1.8 kJ/m² ISO 179/1eA
熱的特性単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 80 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 118 °C ISO 75-1/-2
ビカット軟化温度, B 92 °C ISO 306
1.5mm厚さでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 1.5 mm -
Yellow Card 可用 はい - -
厚さhでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 1.5 mm -
Yellow Card 可用 はい - -
厚さhでの燃焼性 5V 5VA class IEC 60695-11-20
試験片の厚さ 3.0 mm -
Yellow Card 可用 はい - -
酸素指数 29 % ISO 4589-1/-2
電気的特性.単位テスト基準
ISO データ
体積抵抗率 1E11 Ohm*m IEC 62631-3-1
表面抵抗率 >1E15 Ohm IEC 62631-3-2
耐トラッキング性 600 - IEC 60112
その他の特性.単位テスト基準
密度 1500 kg/m³ ISO 1183
Processing Recommendation Injection Molding単位テスト基準
Pre-drying - Temperature 80 °C -
Pre-drying - Time 2 - 4 h -
樹脂温度 200 - 220 °C -
金型温度 40 - 80 °C -
特殊な特性
成形加工法.
射出成形.
納入形状.
顆粒.
添加剤.
離型剤.
特殊な特性.
難燃.
領域別の利用可能性
その他の情報
村遜速揃
PREPROCESSING; Pretreatment
Predrying usually not neccessary (2-4h / 80°C)

PROCESSING ;Processing:

Melttemperature200 - 220°C
Mouldtemperature40 - 80°C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.