Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Premium ABS - ABS - Formfutura BV

Material Data Center offers the following functions for Premium ABS:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Premium datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics単位テスト基準
ISO データ
メルトボリュームレイト, MVR 5.5 cm³/10min ISO 1133
温度 220 °C -
荷重 10 kg -
機械的特性単位テスト基準
ISO データ
引張弾性率 1860 MPa ISO 527
降伏応力 36 MPa ISO 527
破壊呼びひずみ 9 % ISO 527
ノッチ付きIzod衝撃強さ, +23°C 29 kJ/m² ISO 180/1A
Ball indentation hardness 71 MPa ISO 2039-1
Other Standards[S]
曲げ弾性率, 23°C 2150 MPa
曲げ強さ 65.7 MPa
S: These properties are reported by the producer according standards that are different to our defaults.
熱的特性単位テスト基準
ISO データ
溶融温度, 10゚C/min 145 °C ISO 11357-1/-3
ビカット軟化温度, A 92 °C ISO 306
その他の特性.単位テスト基準
吸水率. 0.23 % Sim. to ISO 62
吸湿率 1.04 % Sim. to ISO 62
密度. 1030 kg/m³ ISO 1183
特殊な特性
成形加工法.
Additive Manufacturing
納入形状.
Monofilament
特殊な特性.
高耐衝撃及び耐衝撃改良.
な特性
Low Warpage, Thermal Stability
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.