Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Promyde® B300 P - PA6 - Nurel S.A.

Material Data Center offers the following functions for Promyde® B300 P:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Promyde datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
メルトボリュームレイト, MVR 300 / * cm³/10min ISO 1133
温度 275 / * °C -
荷重 5 / * kg -
成形収縮率, 平行 1.0 / * % ISO 294-4, 2577
成形収縮率, 直角 0.9 / * % ISO 294-4, 2577
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 3200 / 1100 MPa ISO 527
引張強度 85 / 40 MPa ISO 527
降伏ひずみ 4 / 25 % ISO 527
破壊ひずみ 10 / >50 % ISO 527
曲げ弾性率, 23°C 2800 / 1000 MPa ISO 178
曲げ強さ 115 / 40 MPa ISO 178
シャルピー衝撃強さ, +23°C N / N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 5 / 40 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30ﾟC 4 / - kJ/m² ISO 179/1eA
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10ﾟC/min 222 / * °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 65 / * °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 187 / * °C ISO 75-1/-2
線膨張係数, 平行 70 / * E-6/K ISO 11359-1/-2
線膨張係数, 直角 100 / * E-6/K ISO 11359-1/-2
1.5mm厚さでの燃焼性 V-2 / * class IEC 60695-11-10
試験片の厚さ 1.5 / * mm -
グローワイヤ燃焼性指数 (GWFI) 750 °C IEC 60695-2-12
GWFI - 試験片の厚さ 1.5 mm -
グローワイヤ着火温度 (GWIT) 700 °C IEC 60695-2-13
GWIT - 試験片の厚さ 1.5 mm -
電気的特性.乾燥/調湿単位テスト基準
ISO データ
耐トラッキング性 600 / - - IEC 60112
Other Standards[S]
比誘電率, 1MHz 3.5 / 7 - IEC 60250
誘電正接, 1MHz 300 / 3000 E-4 IEC 60250
体積抵抗率 1E13 / 1E10 Ohm*m IEC 60093
表面抵抗率 * / 1E10 Ohm IEC 60093
S: These properties are reported by the producer according standards that are different to our defaults.
その他の特性.乾燥/調湿単位テスト基準
吸水率. 9.5 / * % Sim. to ISO 62
吸湿率 3 / * % Sim. to ISO 62
密度. 1130 / - kg/m³ ISO 1183
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature <80 °C -
Pre-drying - Time 4 - 6 h -
樹脂温度 230 - 280 °C -
金型温度 40 - 80 °C -
特殊な特性
成形加工法.
射出成形.
添加剤.
滑剤.
特殊な特性.
熱安定化.
な特性
Nucleated
アプリケーション
自動車, 電気電子
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.