Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RamTough PZ726 - PC - Polyram

Material Data Center offers the following functions for RamTough PZ726:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ramtough datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトフローレート, MFI 17 g/10min ISO 1133
温度 300 °C -
荷重 1.2 kg -
成形収縮率, 平行 0.7 % ISO 294-4, 2577
機械的特性値単位テスト基準
ISO データ
降伏応力 62 MPa ISO 527
破壊ひずみ 120 % ISO 527
曲げ弾性率, 23°C 2400 MPa ISO 178
ノッチ付きIzod衝撃強さ, +23°C 94 kJ/m² ISO 180/1A
ASTM数据
曲げ強さ 98 MPa ASTM D 790
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 130 °C ISO 75-1/-2
1.5mm厚さでの燃焼性 V-2 class IEC 60695-11-10
試験片の厚さ 1.6 mm -
ASTM数据
ビカット軟化温度 148 °C ASTM D 1525
電気的特性.値単位テスト基準
ISO データ
体積抵抗率 1E13 Ohm*m IEC 62631-3-1
表面抵抗率 1E15 Ohm IEC 62631-3-2
その他の特性.値単位テスト基準
密度. 1200 kg/m³ ISO 1183
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット.
特殊な特性.
高耐衝撃及び耐衝撃改良., 紫外線安定化.
な特性
Low Odor
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.