Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RECarbon® 90 CFP40-400g - EP-CF40 - Polynt S.p.A.

Material Data Center offers the following functions for RECarbon® 90 CFP40-400g:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Recarbon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Resistant. Negligible, reversible or no changes in mass and dimensions.

Please consider the information about the application of the materials.
Processing/Physical Characteristics値単位テスト基準
ISO データ
成形収縮率, 平行 0 % ISO 294-4, 2577
機械的特性値単位テスト基準
ISO データ
引張弾性率 30100 MPa ISO 527
引張強度 210 MPa ISO 527
シャルピー衝撃強さ, +23°C 12 kJ/m² ISO 179/1eU
Other Standards[S]
曲げ弾性率, 23°C 33000 MPa ISO 14125
曲げ強さ 335 MPa ISO 14125
S: These properties are reported by the producer according standards that are different to our defaults.
熱的特性値単位テスト基準
ISO データ
ガラス転移点, 10ﾟC/min 150 °C ISO 11357-1/-2
その他の特性.値単位テスト基準
密度. 1470 kg/m³ ISO 1183
特殊な特性
成形加工法.
Compression Molding
納入形状.
塊状成形材料
Certifications
Recycled Resin Content
アプリケーション
自動車
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.