Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® Clear G850 Rnew® MED - PA* - ARKEMA

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

PA,,GHT,C14-020

Rilsan® Clear G 850 Rnew® MED is a high performance transparent copolyamide having outstanding purity level, partially based on renewable resources. This grade offers highest quality  and is specifically designed to meet the stringent requirements of the medical applications.

According to ASTM D6866, the biobased carbon content is measured at 45%.

Main applications:

• Dental accessories
• Breathing mask
• Medical perfusion tube accessories

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit,  please refer to our technical services.

Processing/Physical Characteristics	乾燥/調湿	単位	テスト基準
ISO データ
メルトボリュームレイト, MVR	4.4 / *	cm³/10min	ISO 1133
温度	275 / *	°C	-
荷重	2.16 / *	kg	-
成形収縮率, 平行	0.9 / *	%	ISO 294-4, 2577
成形収縮率, 直角	0.9 / *	%	ISO 294-4, 2577

機械的特性	乾燥/調湿	単位	テスト基準
ISO データ
引張弾性率	1680 / 1640	MPa	ISO 527
降伏応力	64 / 58	MPa	ISO 527
降伏ひずみ	8.2 / 8.6	%	ISO 527
破壊呼びひずみ	>50 / >50	%	ISO 527
ノッチ付きシャルピー衝撃強さ, +23°C	8.5 / 15	kJ/m²	ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C	8.6 / 11.4	kJ/m²	ISO 179/1eA
ショア硬さD	80 / *	-	ISO 7619-1

熱的特性	乾燥/調湿	単位	テスト基準
ISO データ
ガラス転移点, 10°C/min	145 / *	°C	ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa	120 / *	°C	ISO 75-1/-2
荷重たわみ温度, 0.45 MPa	135 / *	°C	ISO 75-1/-2

その他の特性.	乾燥/調湿	単位	テスト基準
吸水率	4 / *	%	Sim. to ISO 62
吸湿率	1.7 / *	%	Sim. to ISO 62
密度	1010 / 1010	kg/m³	ISO 1183
Biobased content	45	%	-

機能

特殊な特性

成形加工法.

射出成形., フィルム押出成形.

納入形状.

ペレット.

特殊な特性.

熱安定化., 透明.

Certifications

Contains renewable resources

アプリケーション

医療の

領域別の利用可能性

北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ

その他の情報

村遜速揃

Processing conditions:
- Typical melt temperature  (Min / Recommended / Max)  : 250°C / 280°C / 300°C
- Typical mold temperature  : 20 - 80 °C
- Dyring time and temperature (only for bags opened for more than two hours): 4 - 6 hours at 90°C

フィルム押出成形.

Extrusion Process conditions:

- Typical melt temperature  (Min / Recommended / Max)  : 250°C / 270°C / 290°C

- Dyring time and temperature (only for bags opened for more than two hours): 4 - 6 hours at 90°C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.