Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SCHULADUR® A GB 20 - PBT-GB20 - LyondellBasell Industries

Material Data Center offers the following functions for SCHULADUR® A GB 20:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Schuladur datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
20% glass bead reinforced PBT-grade.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 15 cm³/10min ISO 1133
温度 250 °C -
荷重 2.16 kg -
ASTM数据
成形収縮率., 平行 0.018 mm/mm ASTM D 955
機械的特性値単位テスト基準
ISO データ
引張弾性率 3400 MPa ISO 527
破壊応力 50 MPa ISO 527
破壊ひずみ 6 % ISO 527
シャルピー衝撃強さ, +23°C 50 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C 30 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 5 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C 3.5 kJ/m² ISO 179/1eA
ASTM数据
破壊応力 48.3 MPa ASTM D 638
曲げ弾性率 3447 MPa ASTM D 790
曲げ強さ 86.2 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 42.7 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 94 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 175 °C ISO 75-1/-2
ビカット軟化温度, B 184 °C ISO 306
1.5mm厚さでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 1.6 mm -
Yellow Card 可用 はい - -
厚さhでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 3.2 mm -
Yellow Card 可用 はい - -
ASTM数据
DTUL @ 66 psi 177 °C ASTM D 648
DTUL @ 264 psi 110 °C ASTM D 648
電気的特性.値単位テスト基準
ISO データ
体積抵抗率 >1E13 Ohm*m IEC 62631-3-1
表面抵抗率 >1E15 Ohm IEC 62631-3-2
その他の特性.値単位テスト基準
密度 1440 kg/m³ ISO 1183
密度 1450 kg/m³ ASTM D 792
特殊な特性
成形加工法.
射出成形.
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.