Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Selfy MC 912 - PET - Selenis Portugal, S.A.

Material Data Center offers the following functions for Selfy MC 912:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Selfy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
熱的特性単位テスト基準
Other Standards[S]
ガラス転移温度 85 °C ASTM D 3418
S: These properties are reported by the producer according standards that are different to our defaults.
その他の特性.単位テスト基準
Intrinsic Viscosity 0.72 dl/g -
密度 1270 kg/m³ ASTM D 792
Color L 64 - CIE
Color b 1 - CIE
Moisture Content 0.3 % -
Bulk Density 730 kg/m³ -
Processing Recommendation Injection Molding単位テスト基準
Pre-drying - Temperature 65 °C -
Pre-drying - Time 5 - 6 h -
Processing humidity ≤0.004 % -
樹脂温度 180 - 250 °C -
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット.
特殊な特性.
透明.
な特性
Amorphous, High Gloss, Low Odor, Copolymer
耐薬品性
General Chemical Resistance
Certifications
Food contact, Food approval 10/2011, Food approval FDA 21 CFR
領域別の利用可能性
北アメリカ., ヨーロッパ., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.