Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SINKRAL® C 333/M2 - ABS - Versalis S.p.A

Check here, which other Sinkral datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 試験片の成形条件. - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

Symbol according to ISO 1043-1: ABS

Designation: Thermoplastics ISO 2580-ABS 1,MG,105-04-16-20

Special low gloss grade for injection moulding which combines medium heat resistance with a good balance between  stiffness and toughness.

Applications:

Main application for this grade is automotive interiors, for example dashboard instruments and panels, where a matt surface finish and high thermal resistance are highly desirable.

The choice of this material, when properly processed in tools having a suitable quality finish, can mean the elimination of subsequent painting operations with a consequent reduction in part costs, together with easier recycling.

Processing/Physical Characteristics	値	単位	テスト基準
ISO データ
メルトボリュームレイト, MVR	5	cm³/10min	ISO 1133
温度	220	°C	-
荷重	10	kg	-
溶融時の密度	960	kg/m³	-
溶融時の比熱	2150	J/(kg K)	-

機械的特性	値	単位	テスト基準
ISO データ
引張弾性率	1900	MPa	ISO 527
降伏応力	33	MPa	ISO 527
降伏ひずみ	3	%	ISO 527
破壊呼びひずみ	>50	%	ISO 527
シャルピー衝撃強さ, +23°C	N	kJ/m²	ISO 179/1eU
シャルピー衝撃強さ, -30°C	150	kJ/m²	ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C	15	kJ/m²	ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C	8	kJ/m²	ISO 179/1eA

熱的特性	値	単位	テスト基準
ISO データ
ガラス転移点, 10°C/min	109	°C	ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa	83	°C	ISO 75-1/-2
ビカット軟化温度, B	101	°C	ISO 306
線膨張係数, 平行	90	E-6/K	ISO 11359-1/-2
1.5mm厚さでの燃焼性	HB	class	IEC 60695-11-10
試験片の厚さ	1.5	mm	-

電気的特性.	値	単位	テスト基準
ISO データ
比誘電率, 1MHz	3.1	-	IEC 62631-2-1
誘電正接, 1MHz	150	E-4	IEC 62631-2-1
体積抵抗率	1E13	Ohm*m	IEC 62631-3-1
表面抵抗率	1E14	Ohm	IEC 62631-3-2
耐電圧	30	kV/mm	IEC 60243-1
耐トラッキング性	600	-	IEC 60112

その他の特性.	値	単位	テスト基準
吸水率	0.6	%	Sim. to ISO 62
吸湿率	0.2	%	Sim. to ISO 62
密度	1050	kg/m³	ISO 1183

試験片の成形条件.	値	単位	テスト基準
ISO データ
ISO規格による成形条件	2580	-	ISO ....-2
射出成形, 樹脂温度	250	°C	ISO 294
射出成形, 金型温度	60	°C	ISO 294
射出成形, 射出速度	200	mm/s	ISO 294
射出成形, 保圧	70	MPa	ISO 294

機能

特殊な特性

成形加工法.

射出成形.

納入形状.

ペレット.

特殊な特性.

熱安定化.

領域別の利用可能性

北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ

その他の情報

村遜速揃

Injection Molding
PREPROCESSING

Drying conditions:

    Drying temperature                80 °C

    Drying time                          2 - 4 h

    Maximum water content         0.2 %

PROCESSING

Typical processing temperature range:

    Melt temperature         230 - 270 °C

    Mold temperature          50  -  80 °C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.