Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Styroflex® ECO 2G66 BC60 - SB - INEOS Styrolution

Material Data Center offers the following functions for Styroflex® ECO 2G66 BC60:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Styroflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 光学特性 - その他の特性. - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Carbon Footprint Reduction vs Fossil-Based (3rd party validated): 77 % (ISO 14044)
Attributed Content of ISCC-certified Bio-Circular Sources: 60 %
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 13 cm³/10min ISO 1133
温度 200 °C -
荷重 5 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 70 MPa ISO 527
降伏応力 3 MPa ISO 527
降伏ひずみ 50 % ISO 527
破壊呼びひずみ 500 % ISO 527
破壊応力 9 MPa ISO 527
破壊ひずみ 450 % ISO 527
曲げ弾性率, 23°C 60 MPa ISO 178
曲げ強さ 2 MPa ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C N kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30ﾟC 2 kJ/m² ISO 179/1eA
ショア硬さA 86 - ISO 7619-1
ショア硬さD 30 - ISO 7619-1
熱的特性値単位テスト基準
ISO データ
ビカット軟化温度, A 39 °C ISO 306
光学特性値単位テスト基準
ASTM数据
ヘイズ 10 % ASTM D 1003
視感透過率 80 % ASTM D 1003
Other Standards[S]
くっせつりつ 1.57 - ISO 489
S: These properties are reported by the producer according standards that are different to our defaults.
その他の特性.値単位テスト基準
吸水率. 0.07 % Sim. to ISO 62
密度. 998 kg/m³ ISO 1183
Processing Recommendation Extrusion値単位テスト基準
樹脂温度 170 - 240 °C -
金型温度 30 - 50 °C -
特殊な特性
成形加工法.
射出成形., Blown Film Extrusion, フィルム押出成形.
納入形状.
ペレット.
特殊な特性.
高耐衝撃及び耐衝撃改良., 透明., 滅菌可能, エチレンオキシド滅菌(EtO), Gamma irradiation sterilization
耐薬品性
Radiation Resistance
Certifications
Contains renewable resources, Food contact, ISCC Plus
アプリケーション
医療の, パッケージング
領域別の利用可能性
ヨーロッパ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.