Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SUPREME SM 505 M - SMMA - Supreme Petrochem Ltd

Material Data Center offers the following functions for SUPREME SM 505 M:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Supreme datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 光学特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 4 g/10min ASTM D 1238
温度 200 °C -
荷重 5 kg -
成形収縮率., 平行 0.004 mm/mm ASTM D 955
機械的特性値単位テスト基準
ASTM数据
引張強度 52 MPa ASTM D 638
曲げ弾性率 3350 MPa ASTM D 790
曲げ強さ 92 MPa ASTM D 790
熱的特性値単位テスト基準
ASTM数据
UL94 燃焼性 HB - UL 94
追加試験片の厚さ 1.5 mm -
DTUL @ 264 psi 80 °C ASTM D 648
ビカット軟化温度 95 °C ASTM D 1525
光学特性値単位テスト基準
ASTM数据
ヘイズ 0.3 % ASTM D 1003
視感透過率 92 % ASTM D 1003
その他の特性.値単位テスト基準
密度 1070 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 60 - 80 °C -
Pre-drying - Time 3 h -
樹脂温度 180 - 240 °C -
金型温度 35 - 60 °C -
特殊な特性
成形加工法.
射出成形.
特殊な特性.
透明.
な特性
High Gloss, Scratch Resistant
Certifications
Food contact, Food approval FDA 21 CFR, RoHS
アプリケーション
IT/ビジネスマシーンズ, おもちゃ
領域別の利用可能性
近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.