Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tecolen® HP10 GR30 NL HS - PP-GF30 - Eurotec Mühendislik Plastikleri

Material Data Center offers the following functions for Tecolen® HP10 GR30 NL HS:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Tecolen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
機械的特性値単位テスト基準
ISO データ
引張弾性率 6250 MPa ISO 527
破壊応力 90 MPa ISO 527
破壊ひずみ 3 % ISO 527
ノッチ付きIzod衝撃強さ, +23°C 14 kJ/m² ISO 180/1A
熱的特性値単位テスト基準
ISO データ
溶融温度, 10ﾟC/min 168 °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 155 °C ISO 75-1/-2
1.5mm厚さでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 1.6 mm -
厚さhでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 0.8 mm -
電気的特性.値単位テスト基準
ISO データ
体積抵抗率 1E13 Ohm*m IEC 62631-3-1
表面抵抗率 1E15 Ohm IEC 62631-3-2
その他の特性.値単位テスト基準
密度. 1110 kg/m³ ISO 1183
Processing Recommendation Injection Molding値単位テスト基準
樹脂温度 200 - 240 °C -
金型温度 20 - 50 °C -
Feed temperature ≤60 °C -
後硬化時間 40 - 80 MPa -
特殊な特性
成形加工法.
射出成形.
納入形状.
ナチュラルカラー
特殊な特性.
熱安定化.
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.