Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Teldene® H12ML-MG - PP - National Petrochemical Industrial Co.

Material Data Center offers the following functions for Teldene® H12ML-MG:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Teldene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 12 g/10min ASTM D 1238
温度 230 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 1550 MPa ISO 527
降伏応力 35 MPa ISO 527
降伏ひずみ 13 % ISO 527
破壊応力 26 MPa ISO 527
破壊ひずみ >50 % ISO 527
曲げ弾性率, 23°C 1500 MPa ISO 178
ノッチ付きIzod衝撃強さ, +23°C 3.9 kJ/m² ISO 180/1A
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 0.45 MPa 91 °C ISO 75-1/-2
ビカット軟化温度, A 152 °C ISO 306
ASTM数据
UL94 燃焼性 HB - UL 94
その他の特性.値単位テスト基準
密度. 900 kg/m³ ISO 1183
特殊な特性
成形加工法.
射出成形.
な特性
Homopolymer
Certifications
Food contact, Food approval 1935/2004/EC, Food approval 10/2011, Food approval FDA 21 CFR, Medical Grade, Biocompatibility ISO 10993, US Pharmacopeia Class VI Approved
アプリケーション
医療の
領域別の利用可能性
近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.